Hello all, I just had a quick question on FreeTDM configuration. I have looked through the Wiki (both FreeSWITCH and Sangoma) and found a couple of references to running T1 boards with robbed bit signaling (RBS), but I have not gotten any configuration to work. Is anyone using FreeTDM with T1 RBS and able to comment on my freetdm.conf? [span zt tsu600e] fxo-channel => 1-4 I am using an Adtran channel bank (TSU600e) with FXS cards and a telephone to try to generate test calls (T1 configured as AMI/D4). This is connected to a Digium TE-220 Dual T1 card. I am using the Dahdi 2.6.0 drivers and I have no alarms on the T1. I am also using the latest FreeSwitch git (as of Apr 17 10am Eastern Daylight Time). Any help or pointers would be appreciated. Thanks, -- David George Hark Technologies