Hello All, I posted a FS log into the Pastebin at http://pastebin.freeswitch.org/11644. I am still having the problem where a PSTN-to-Internal call via a Sangoma A101D card stops ringing the internal phone after about 10 seconds. It should be ringing for 30 seconds and then go to Voice Mail (as an Internal-to-Internal call does). Best Regards, Jerry -----Original Message----- From: Jerry Richards [mailto:jerry.richards@teotech.com] Sent: Tuesday, December 22, 2009 8:02 AM To: 'freeswitch-users@lists.freeswitch.org' Subject: PSTN-to-Internal Call Does Not Get Routed to Voice Mail I have a Freeswitch PBX server with an installed Sangoma A101D card connected to a PRI. Most everything works okay, however when I get an inbound call from the PSTN, if the call is not answered within about 12 seconds, the call ends (so it doesn't go to voice mail). If I make a call from one internal phone to another, then it will go to voice mail after 30 seconds. How can I get the external call to route to voice mail after 30 seconds? I put a new 11595 log into the pastebin. Do you know any Freeswitch setting that might cause this? If this issue has been addressed before, what string should I use to search for it, because I can't find it. Thanks, Jerry