Hello, I am attempting to generate a message to convert to speech and send it out to my users. I am a newbie but I am just not getting it after reading through the documentation. In testing it works fine when sending to my voip connected users using the following: bgapi originate {ignore_early_media=true,originate_timeout=60}sofia/internal/1001 &playback(/usr/local/freeswitch/sounds/warning.wav) however, when I dial a cell phone as below it rings the phone but immediately hangs up before playing the message. Is there something obvious I am doing wrong? bgapi originate {ignore_early_media=true,originate_timeout=60}sofia/gateway/sip.startec.com/14431112222 &playback(/usr/local/freeswitch/sounds/warning.wav)<http://sip.startec.com/14431112222&playback(/usr/local/freeswitch/sounds/warning.wav)> and then the follow up question is do I need bridge the call in the dialplan like so? <!-- Dial 11 digit number via startec --> <extension name="outbound"> <condition field="destination_number" expression="^(\d{11})$"> <!--<action application="set" data="effective_caller_id_number=4439951026"/>--> <!-- <action application="answer"/> <action application="playback" data="/usr/local/freeswitch/sounds/warning.wav"/> --> <!--<action application="speak" data="cepstral|david|Please hold this is a test"/> --> <action application="bridge" data="sofia/gateway/ sip.startec.com/$1@xx.xx.xx.xx:5061"/> </condition> </extension>