~I'm hoping I'm not doing something wrong by replying to this message. Sorry I'm using message boards and irc most of the time and not mailing lists. Well after installing sl-modem-daemon and modem-cmd I was able to call my mobile phone bo using command modem-cmd /dev/modem ATD9<mobile phone> - 9 tells my Panasonic KX-T61610B to use first outside line available. After a while I heard my mobile phone ringing. That's why I'm not really convinced that it won't work because it will lack the drivers. Well maybe FreeSWITCH needs some special drivers I don't know of. I probably should have said it before but my telephone line isn't plugged in directly into my modem. Its connected via Panasonic KX-T61610B. I'm planning on using some old junk as its well I wouldn't call it replacement. More like supplement because I want them to work side by side. Since abilities of that KX-... are really poor I want to put some old crappy computer with telephone modem inside next to it which will handle things like IVR. But before I will get to this I want to check if I'm not stupid enough to even set it up on my Toshiba Satellite M30 laptop which happens has a modem. I would like to explore all the possibilities before I will start investing money in something unnecessary or in something I can't handle. So despite the fact I was able to use it to call myself on cellphone are you really sure I won't be able to set it up this way?
---------- Forwarded message ---------- From: Ken Rice <krice@freeswitch.org> To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> Cc: Date: Tue, 24 Jan 2012 11:48:16 -0600 Subject: Re: [Freeswitch-users] Running FreeSWITCH on softmodem Not to mention intel discontinued the chipset used on that card ages ago... You’ll be lucky to find them today
On 1/24/12 11:43 AM, "curriegrad2004" <curriegrad2004@gmail.com> wrote:
Don't even bother getting a x100p or it's clones either. It's been reported to work very poorly as an fxo. If you dug deeper you'll find that it's really a softmodem by Intel.
On 2012-01-24 9:02 AM, "Ken Rice" <krice@freeswitch.org> wrote:
Unfortunately most softmodems are not supported as a Telephony interface... The problem is lack of drivers. The simple answer is it wont work...
You're best bet is to get an ATA with both FXO and FXS ports and connect via SIP...
On 1/24/12 4:15 AM, "Sebastian Tarach" <starach@gmail.com> wrote:
Hello,
I'm pretty new to the whole idea of using Linux as telephone central . I tried to setup Asterisk at first but failed. Although I have managed to install it I was unable to "call my computer". That's why I was hoping to deal with FreeSWITCH better. Please tell a noob like myself how to make this finally work. Keep in mind that something that is clear to you to me is probably a dark magic. For instance in installation guide there are mentioned few different ways to connect to a modem. Which method should I use if it comes to my modem :
$ lspci -d 8086:24c6 -vvv 00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03) (prog-if 00 [Generic]) Subsystem: Toshiba America Info Systems Device 0001 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 4 Region 0: I/O ports at 2400 [size=256] Region 1: I/O ports at 2000 [size=128] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: Intel ICH Modem
Thanks in advance
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
________________________________ _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
---------- Forwarded message ---------- From: Nandy Dagondon <gcd@i.ph> To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> Cc: Date: Wed, 25 Jan 2012 01:51:26 +0800 Subject: Re: [Freeswitch-users] Running FreeSWITCH on softmodem FreeSWITCH doesn't need softmodem unlike Asterisk where an X100P (or a Digium card) is needed as a timing device.
On Tue, Jan 24, 2012 at 6:15 PM, Sebastian Tarach <starach@gmail.com> wrote:
Hello,
I'm pretty new to the whole idea of using Linux as telephone central . I tried to setup Asterisk at first but failed. Although I have managed to install it I was unable to "call my computer". That's why I was hoping to deal with FreeSWITCH better. Please tell a noob like myself how to make this finally work. Keep in mind that something that is clear to you to me is probably a dark magic. For instance in installation guide there are mentioned few different ways to connect to a modem. Which method should I use if it comes to my modem :
$ lspci -d 8086:24c6 -vvv 00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03) (prog-if 00 [Generic]) Subsystem: Toshiba America Info Systems Device 0001 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 4 Region 0: I/O ports at 2400 [size=256] Region 1: I/O ports at 2000 [size=128] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: Intel ICH Modem
Thanks in advance
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
---------- Forwarded message ---------- From: curriegrad2004 <curriegrad2004@gmail.com> To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> Cc: Date: Tue, 24 Jan 2012 09:52:08 -0800 Subject: Re: [Freeswitch-users] Running FreeSWITCH on softmodem
Yeah, seen a lot of fake x100ps on eBay too so steer clear of that place too.
On 2012-01-24 9:49 AM, "Ken Rice" <krice@freeswitch.org> wrote:
Not to mention intel discontinued the chipset used on that card ages ago... You’ll be lucky to find them today
On 1/24/12 11:43 AM, "curriegrad2004" <curriegrad2004@gmail.com> wrote:
Don't even bother getting a x100p or it's clones either. It's been reported to work very poorly as an fxo. If you dug deeper you'll find that it's really a softmodem by Intel.
On 2012-01-24 9:02 AM, "Ken Rice" <krice@freeswitch.org> wrote:
Unfortunately most softmodems are not supported as a Telephony interface... The problem is lack of drivers. The simple answer is it wont work...
You're best bet is to get an ATA with both FXO and FXS ports and connect via SIP...
On 1/24/12 4:15 AM, "Sebastian Tarach" <starach@gmail.com> wrote:
Hello,
I'm pretty new to the whole idea of using Linux as telephone central . I tried to setup Asterisk at first but failed. Although I have managed to install it I was unable to "call my computer". That's why I was hoping to deal with FreeSWITCH better. Please tell a noob like myself how to make this finally work. Keep in mind that something that is clear to you to me is probably a dark magic. For instance in installation guide there are mentioned few different ways to connect to a modem. Which method should I use if it comes to my modem :
$ lspci -d 8086:24c6 -vvv 00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03) (prog-if 00 [Generic]) Subsystem: Toshiba America Info Systems Device 0001 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 4 Region 0: I/O ports at 2400 [size=256] Region 1: I/O ports at 2000 [size=128] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: Intel ICH Modem
Thanks in advance
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
________________________________ _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org