Hello guys, I'm facing a big trouble for several hours ago and need help.... I'm using Freeswitch v1.10.2 with webRTC successfully installed and running. On the user/webphone side, I'm using Chrome 81.0.4044.138. Incoming and outgoing calls works fine with my webphone stack on my browsers (Firefox, Chrome). No warnings or errors at both sides. But when I do the following scenario with a webphone that can manage several calls at the same time (multi-line feature), it does not work : 1. make a first call routed to a webrtc extension, answer it and keep it connected 2. make a second call routed to the same extension, do not answer and keep the first call connected 3. make a third call routed to the same extension and hold the first line to accept this new call=> when I try to answer this 3rd call, the call is always dropped After digging into logs, and packets captured with wireshark, I found that when the freeswitch try to exchange with the browser to negociate SRTP flow for the 3rd call, it use DTLS v1.0 protocol (instead of v1.2) : Unfortunately, support for DTLS v1.0 seems to have been dropped on my webphone/browser side and the freeswitch fail on last DTLS exchange with this logs : [INFO] switch_rtp.c:3736 Activate RTP/RTCP audio DTLS client [INFO] switch_rtp.c:3903 Changing audio DTLS state from OFF to HANDSHAKE [...] [ERR] switch_rtp.c:3266 audio Handshake failure 1. This may happen when you use legacy DTLS v1.0 (legacyDTLS channel var is set) but endpoint requires DTLS v1.2. On freeswitch side, I found only one option linked to the DTLS version (legacyDTLS, as written in logs) which I never set in my config. I checked my open ssl version on the freeswitch server (1.1.1d). The thing that is disturbing to me is that if I hold the first call and answer the second call, it works well. The issue occurs only for the third call and after a missed/refused call while still connected with first call in parallel. Digging into freeswitch source, I found that it seems to use version-flexible DTLS methods of openssl (DTLS_server_method() and DTLS_client_method()) and I cannot see how to quicly and simply always force DTLS v1.2 ? Have any of you ever had this kind of problem or know how to solve it ? Regards, FX
