Harondel J. Sibble wrote:
I am trying to get 2x X100P's working
Provided you are aware that a lot of users have problems getting X100xP cards to work on their hardware (either due to some issue with the PCI bus, or the Silicon Labs DAA chips not supporting the POTS line to which they are connected)... here's what I did to compile Dahdi (the new name for Zaptel) from source: 1. Download and unpack the Dahdi tarball 2. make all ; make install ; make config 3. cd /etc/dahdi/ ; vi system.conf: #Per FS wiki: "Tones should be configured in OpenZAP and not in zaptel. FreeSWITCH uses its libteletone for tones generation and detection, and does not rely on zaptel tones configuration. Therefore it does not matter which country zone is configured in zaptel. Make sure that you have loaded your country-specific tones at /etc/openzap/tones.conf" #loadzone = fr #defaultzone = fr fxsks=1 4. vi modules; add "wctdm" 5. /etc/init.d/dahdi start 6. lsmod to check loaded modules 7. dahdi_cfg -vvv ; dahdi_scan ; dahdi_test -v 8. ls -la /proc/dahdi/ ; cat /proc/dahdi/1 The next step, which I haven't done yet, is compiling OpenZap so it talks to Dahdi/Zaptel, which talks to the actual hardware. -- View this message in context: http://old.nabble.com/problems-getting-openzap-compiled-for-use-with-freeswi... Sent from the Freeswitch-users mailing list archive at Nabble.com.