We have used the shared line feature for some time now. What actually happens when the call is picked up by the second phone sends an INVITE to FS and FS connects the call to the second phone, there isn't a transfer (REFER) between the phones because they are sharing that call. What we have found is this worked before version 1.2.0 and now there is a problem. Could you verify what you're experiencing when you pick the call on phone 2, is the call drops because FS is sending BYE to the phone that picked up the call and the caller? The other phones have their lights go green because they are sent a NOTIFY with the appearance-state=idle. In the SIP trace you should see an INVITE from the second phone, 200 OK, BYEs and then NOTIFYs. Is so, then you are experiencing the same issue we are. Mike On 8/23/2012 9:33 AM, Colin Mason wrote:
So I have been experimenting with a key system for an office with 3 Cisco SPA504G phones and FreeSWITCH 1.2.1. They require 3 shared lines. I have inbound and outbound calls working properly with the shared lines and the phones are configured properly with shared lines, Broadcom etc. Visually everything seems to work with the line notifications on the 3 phones.
My internal profile has:
<param name="manage-shared-appearance" value="true"/>
<param name="manage-presence" value="true"/>
<param name="dbname" value="share_presence"/>
<param name="presence-hosts" value="$${domain}"/>
<param name="multiple-registrations" value="true"/>
<param name="force-register-domain" value="$${domain}"/>
<param name="force-subscription-domain" value="$${domain}"/>
<param name="force-register-db-domain" value="$${domain}"/>
<param name="presence-probe-on-register" value="true"/>
<param name="presence-privacy" value="$${presence_privacy}"/>
<param name="send-presence-on-register" value="true"/>
I am having problems with transferring calls. If I put a call on hold on phone 1 and press the line 1 button on phone 1, the call resumes just fine. But if I put a call on hold on phone 1 and try to resume the call on phone 2 by pressing the blinking red line 1 button, the phone tries to establish a new call to the user associated with line 1 instead of taking (transferring) the call from phone 1 to phone 2.
I was wondering if anybody could help?
Colin Mason
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org