We used callwithus using the freeswitch basically as a tandem. I believe you need to send them your ip address for them to put in their system, then everything else is just standard config. Make sure their IP address is in your acl list. This is what I used in my dial plan. <action application="bridge" data=mailto:data=sofia/${use_profile}/1$1@carrier.callwithus.com/> They asked us to do the following: * CALLERID: set to blank * HOST: Your SIP server IP address * PORT: Your port (5060 for default port) Send calls to carrier.callwithus.com, port 5060. We stopped using them because to many of their routes kept going down and we did not get proper responses to declined calls, so customers got dead air. Darcy From: Robert Huddleston Sent: Monday, August 29, 2011 10:25 AM To: 'FreeSWITCH Users Help' Subject: [Freeswitch-users] CallWithUs I already reviewed the wiki – does anyone have experience with CallWithUs and using IP Auth / not registration based? -------------------------------------------------------------------------------- FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org