Hi Rick, Does caller-id-in-from=false work for you? Regards, Sebastian Am 5. April 2017 23:13:46 MESZ schrieb Rick Ewart <rick@ewart.net>:
Hi All.
I apologize for what seems to me to be a newbie question but I have been searching and beating my head against the wall. Hoping someone might be able to help as I know it has to be simple and I am just too dense to find it online in the myriad of available information.
I have a SBC with a user setup on it (it's a commercial SBC that is freeswitch based). If I setup a grandstream phone and register to it, it works great and I can place an outbound call without issue. Nothing fancy in my grandstream config - hostname of SBC in the SIP server field, username in the Account Name, SIP User ID and Authenticate ID fields, and a password. Registers immediately and all is well.
If I setup a freeswitch system to do the same, it doesn't want to work for me. It seems to register fine and I see it registered when I do "sofia status gateways" (and on the SBC too), but calls fail with 403 forbidden from the SBC.
Profile::Gateway-Name Data State Ping Time IB Calls(F/T) OB Calls(F/T)
========================================================================== =======================
external::IsleCall sip:ewart123@mysiphost.ewart.net REGED 0.00 0/0 2/2
Doing a packet capture at the SBC of the working and not working calls, the key difference appears to be the From field.
On the failing one I see:
From: "1234 Rick" <sip:1234@99.122.123.123>;tag=raKDjmyU0vNfE
While on the working one I see:
From: "ewart123" <sip:ewart123@mysiphost.ewart.net>;tag=263774504
My outbound gateway configuration on the freeswitch is:
<include>
<gateway name="IsleCall">
<param name="proxy" value="mysiphost.ewart.net"/>
<param name="username" value="ewart123"/>
<param name="password" value="somepassword"/>
<param name="realm" value="mysiphost.ewart.net"/>
<param name="extension" value="ewart123@mysiphost.ewart.net"/>
<param name="caller-id-in-from" value="true"/>
<param name="register" value="true"/>
<param name="expire-seconds" value="600"/>
<param name="retry-seconds" value="30"/>
</gateway>
</include>
Seems to me I am missing something simple to tell it to not use my internal extension and IP but instead reflect the registered username at the SBC, but I will be darned if I can figure out what that should be.
Thanks in advance for any assistance you may be able to provide.
Rick Ewart