Hello all, I've been trying to compile freeswitch and freetdm with pritap support. Everything seems to be going fine, but the module (ftmod_pritap) won't load. I've been told this could be due to version mismatches between freeswitch and freetdm source, but I'm compiling both from git 1.2-stable. I intend to use this with Sangoma's wanpipe TDM Voice API and the driver configured in High Impedence mode (in conjunction with a 2-span E1 sangoma card and a tapping module). The error I get is: freeswitch@modrec> load ftmod_pritap 2012-10-23 12:45:24.284094 [INFO] mod_enum.c:871 ENUM Reloaded 2012-10-23 12:45:24.284094 [INFO] switch_time.c:1163 Timezone reloaded 530 definitions +OK Reloading XML -ERR [module load file routine returned an error] 2012-10-23 12:45:24.284094 [CRIT] switch_loadable_module.c:1310 Error Loading module /usr/local/freeswitch/mod/ftmod_pritap.so **/usr/local/freeswitch/mod/ftmod_pritap.so: undefined symbol: ftmod_pritap_module_interface** STEPS TO REPRODUCE: Start with a clean debian 6.0.6 installation and then: apt-get install subversion git apt-get build-dep asterisk (# Hopefully asterisk and freeswitch share some dependencies) apt-get -y install gcc g++ automake autoconf libtool make libncurses5-dev flex bison patch libtool autoconf linux-headers-$(uname -r) (wanpipe build deps) apt-get remove libpri-dev libpri1.4 (I will be compiling patched libpri with tapping support later) wget ftp://ftp.sangoma.com/linux/current_wanpipe/wanpipe-3.5.28.tgz svn checkout http://svn.digium.com/svn/libpri/team/moy/tap-1.4 (libpri patched with tapping mods) cd tap-1.4/ make make install cd .. tar xzfv wanpipe-3.5.28.tgz cd wanpipe-3.5.28/ ./Setup install (select option 1, for TDM voice API module configuration - required for use by freetdm pritap module - I think) cd .. git clone -b v1.2.stable git://git.freeswitch.org/freeswitch.git cd freeswitch/ ./bootstrap.sh ./configure make make install cd libs/freetdm/ ./configure --with-pritap --prefix=/usr/local/freeswitch make make install /usr/local/freeswitch/bin/freeswitch load ftmod_pritap EXPECTED BEHAVIOUR: ftmod_pritap should load successfully.