I have setup one jabber server running along the Freeswitch on the centos 5, and setup the gtalk in public context as the jabber server component on port 5347 , and established the federation with googletalk network. Now I can call from gtalk client to my sip account on freeswitch without problem by the following dialplan: <extension name="jingle2sip"> <condition field="source" expression="mod_dingaling"/> <condition field="destination_number" expression="^conf\+([^\@]+)\@(.*)$"> <action application="bridge" data="sofia/default/$1%192.168.1.253"/> </condition> </extension> where 192.168.1.253 is the ip address of freeswitch. but I am having issues with the sip2jingle call. in the default context dialplan, I can do this <extension name="sip2jingle"> <condition field="source" expression="mod_sofia"/> <condition field="destination_number" expression="^1500$"> <action application="bridge" data="dingaling/ jabber.mydomain.com/mybuddy@gmail.com"/> </condition> </extension> where the jabber.mydomain.com is the component profile name I defined for the gtalk server component. but if I modify the dialplan to do more general sip2jingle call as below: <extension name="sip2jingle"> <condition field="source" expression="mod_sofia"/> <condition field="destination_number" expression="^jingle\+([^\@]+)\@(.*)$"> <action application="bridge" data="dingaling/ jabber.mydomain.com/$1@gmail.com"/> </condition> </extension> or <extension name="sip2jingle"> <condition field="source" expression="mod_sofia"/> <condition field="destination_number" expression="^jingle\+([^\@]+)\@(.*)$"> <action application="bridge" data="dingaling/sip+${sip_fromuser}@ ${sip_fromhost}/$1@gmail.com"/> </condition> </extension> I tested with jingle+mybuddy.lastname@gmail.com<jingle%2Bmybuddy.lastname@gmail.com>from my extension 1000 on soft phone Bria 2.2 on XP, I got the error " 1000@gmail.com not found" Could you guys share the correct syntax for doing SIP to Jingle calls? Thanks, Chris