Ahmed, I would tell you: restart from scratch, format the hard disk, start from a Debian 10 64 bit Server minimal installation on bare machine, then follow strictly and exactly the instruction on confluence for Debian 10 (buster) install from packages https://freeswitch.org/confluence/display/FREESWITCH/Debian+10+Buster Do not change nothing. Just cut and paste. Then test again The conference code is OK, million people is using it. Have a nice weekend, -giovanni On Fri, Apr 3, 2020 at 7:31 PM Ahmed habiba <ahabiba@gmail.com> wrote:
Hello,
Any one can help?
"I look into code and I see something not sure if I’m right or wrong, when the conference loop is not able to read from input it sleep for 100 MS”?
Thanks, Ahmed Habiba.
*From: *Ahmed habiba <ahabiba@gmail.com> *Subject: **Re: [Freeswitch-users] Voice Conference Voice Choppy(Ahabiba)* *Date: *2 April 2020 at 5:04:27 PM GMT+3 *To: *freeswitch-users@lists.freeswitch.org
Hi,
Here is the Jitter calculated from my machine against the server using perf - the server is baremetal
[ ID] Interval Transfer Bitrate Jitter Lost/Total Datagrams [ 5] 0.00-20.00 sec 2.38 MBytes 1.00 Mbits/sec 0.000 ms 0/1786 (0%) sender [ 5] 0.00-20.00 sec 2.38 MBytes 1000 Kbits/sec 0.321 ms 1/1786 (0.056%) receiver
Perf result from server side: [ ID] Interval Transfer Bandwidth Jitter Lost/Total Datagrams [ 5] 0.00-20.09 sec 2.38 MBytes 996 Kbits/sec 0.321 ms 1/1786 (0.056%)
Client iperf command: iperf3 -u -c 176.31.123.52 -b 1M -i 1 -t 20
Thanks, Ahmed Habiba.
1. Re: Voice Conference Voice Choppy (Giovanni Maruzzelli)
*From: *Giovanni Maruzzelli <gmaruzz@gmail.com> *Subject: **Re: [Freeswitch-users] Voice Conference Voice Choppy* *Date: *2 April 2020 at 1:23:29 PM GMT+3 *To: *FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> *Reply-To: *gmaruzz@opentelecom.it
If you are running in baremetal (eg, no VMs), then check packet loss/jitter...
On Thu, Apr 2, 2020 at 11:53 AM Ahmed habiba <ahabiba@gmail.com> wrote:
Hello,
I’m trying to use FreeSWITCH voice conference, however hear some cuts is the voice from time to time some minor distortions, I look into code and I see something not sure if I’m right or wrong, when the conference loop is not able to read from input it sleep for 100 MS? Kindly advice how to overcome this issue.
To Note, I’m using server with "Xeon E3-1245v2 (4c/8th) - 32GB” and I’m using it for 3 to 4 users only, nothing else ring on this machine.
Thanks, Ahmed Habiba. _________________________________________________________________________
The FreeSWITCH project is sponsored by SignalWire https://signalwire.com Enhance your FreeSWITCH install with disruptive priced SMS and PSTN services. Build your next product on our scalable cloud platform.
Join our online community to chat in real time https://signalwire.community
Professional FreeSWITCH Services sales@freeswitch.com https://freeswitch.com
Official FreeSWITCH Sites https://freeswitch.com/oss https://freeswitch.org/confluence https://cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users https://freeswitch.com
-- Sincerely,
Giovanni Maruzzelli OpenTelecom.IT cell: +39 347 266 56 18
_________________________________________________________________________
The FreeSWITCH project is sponsored by SignalWire https://signalwire.com Enhance your FreeSWITCH install with disruptive priced SMS and PSTN services. Build your next product on our scalable cloud platform.
Join our online community to chat in real time https://signalwire.community
Professional FreeSWITCH Services sales@freeswitch.com https://freeswitch.com
Official FreeSWITCH Sites https://freeswitch.com/oss https://freeswitch.org/confluence https://cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users https://freeswitch.com
-- Sincerely, Giovanni Maruzzelli OpenTelecom.IT cell: +39 347 266 56 18