Re: [Freeswitch-users] ftdm openr2 status interpretation

On Thu, Mar 16, 2017 at 11:24 AM, Nandy Dagondon <nandy1925@gmail.com> wrote:

Hello folks,

Please confirm IF my interpretations are correct.

First, the output of "ftdm r2 status <span>":

Tx CAS is the AB bits sent TO the opposite end Rx CAS is the AB bits rcvd FROM the opposite end

Then, if this is the Called end, then ...

Tx CAS is sending the Backward line signals to the Calling party Rx CAS is the Forward line signals received from the Calling party

And, I want to make sure, if this is the Calling end, then

Tx CAS is sending the Forward line signals; and Rx CAS is receiving the Backward lines signals

All of that sounds correct.