If you are trying to handle incoming calls you probably will have to use outbound socket, otherwise Freeswitch will finish running the dialplan and hangup before your ESL client has a chance to send it any commands. As you can see from the log there are no dialplan matches found so FS responds with a 480. When using outbound mode you put the socket app in the dialplan so that FS knows to hand over the call handling to your ESL client. On Thu, Dec 26, 2013 at 7:15 AM, Yisroel M. Olewski <yisroel@machshevet.com>wrote:
Hi
Thanks fellows
Sorry for the delay, we were a bit busy here lately
I’m attaching the fs log. I don’t even see a the word “answer” there.
It seems fs is totally ignoring the incoming commands
if there’s a way to use inbound (which should be according to the docs) I’d rather not switch around the whole architecture just right now
If there won’t be any other choice, I guess I’ll try that
Thank again
*Sincerely,*
*Yisroel M. Olewski *
*CEO*
+1 (718) 514-2721
+972 (52) 764-9971
*Websites **·** CRM **·** ERP **·** Telephony **·** Inventory **·** Content Management*
*From:* Duvid Rottenberg [mailto:adrottenberg@gmail.com] *Sent:* Tuesday, December 24, 2013 8:51 PM *To:* FreeSWITCH Users Help *Subject:* Re: [Freeswitch-users] answer via .net esl is getting ignored
Try using ESL Outbound mode, I am not sure why it would make a difference, but I have recently used outbound mode and I was able to answer the call. See the mod_event_socket wiki page and the sample code in the managed_esl project for more information.
Duvid Rottenberg
On Tue, Dec 24, 2013 at 10:47 AM, Moishe Grunstein <max@nysolutions.com> wrote:
What are you seeing in the logs?
Thanks,
Moishe Grunstein
Tornado Computer Systems, Inc.
212.400.7650 888.IPPBX.US *Service Request Email: support@nysolutions.com <support@nysolutions.com> *
Polycom Certified VAR Microsoft Small Business Specialist, Cisco SMB Select Certified
[image: cid:image001.jpg@01C72F94.9EE45D60] <http://www.nysolutions.com/>
Computer Networking * Managed Services * IP Video Surveillance * Network Assessments * Web Solutions * Voice over IP * Disaster Recovery * Network Security * Site Surveys * CMS
*From:* freeswitch-users-bounces@lists.freeswitch.org [mailto: freeswitch-users-bounces@lists.freeswitch.org] *On Behalf Of *Yisroel M. Olewski *Sent:* Tuesday, December 24, 2013 4:23 AM *To:* freeswitch-users@lists.freeswitch.org *Subject:* [Freeswitch-users] answer via .net esl is getting ignored
Hello everyone
This is my first posting via the mailing list
I’m trying my hand at freeswitch esl with .net
I’ve managed to get a hold of all incoming events, but can’t seem to "pick up the phone"
my first goal is to pick up the phone and read out some text via tts
I’ve scoured the web, tried everything I can find or think of but no luck
here’s my code
Private Sub winMain_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
ThreadPool.QueueUserWorkItem(New WaitCallback(Sub(stateInfo)
FreeSwitch = New ESLconnection("10.0.0.1", 8021, "mypass")
Dim eslEvent = FreeSwitch.SendRecv("event plain ALL")
FreeSwitch.SendRecv("event plain DTMF")
If eslEvent IsNot Nothing Then
AddEvent(eslEvent)
While FreeSwitch.Connected
eslEvent = FreeSwitch.RecvEvent
AddEvent(eslEvent)
End While
End If
End Sub))
End Sub
Private Sub AddEvent(e As ESLevent)
Dim dd = TextCollection(e.Serialize(""), ": ", vbLf)
Dim eventname = dd("event-name")
'Dim uid = dd("Unique-ID")
Dim uid = dd("Channel-Call-UUID")
If dd("Caller-Network-Addr") <> "" Then
Dim dcx = DBEntities()
Dim ses = dcx.Sessions.SingleOrDefault(Function(x) x.ServerCode = uid)
Dim ChannelState = dd("Channel-State")
Dim ChannelCallState = dd("Channel-Call-State").ToLower
Select Case eventname
Case "CHANNEL_STATE"
If ses Is Nothing Then
ses = New Session
dcx.Sessions.AddObject(ses)
End If
ses.CallerHost = dd("Caller-Network-Addr")
ses.CallerName = UrlDecoded(dd("Caller-Caller-ID-Name"))
ses.CallerPhone = dd("Caller-Caller-ID-Number")
ses.CallerUser = dd("Caller-Username")
ses.CalleeUser = dd("Caller-Destination-Number")
ses.ServerCode = uid
If {"cs_destroy", "cs_hangup"}.Contains(ChannelState) Then ses.HungUpOn = Now
Case "CHANNEL_CALLSTATE"
If ChannelCallState = "ringing" Then
Dim evn = FreeSwitch.Execute("answer", String.Empty, uid)
Dim res = evn.Serialize("")
End If
Case "CHANNEL_DESTROY"
If ses IsNot Nothing Then ses.HungUpOn = Now
End Select
dcx.SaveChanges()
End If
End Sub
the answer line is getting reached, and the result is "+OK" but the phone still keeps ringing
please note that I’m unsure which is the correct uuid, but trying both of them gave me identical results
As per advise from Nuwan Wijerathne, I put the “answer” action in the dialplan, and tried just the playback from code (just a wav file), but the result is the same. Freeswitch ignores entirely my commands.
It picks up, and immediately hangs up because it has finished the whole dialplan
I’d appreciate your help. I’m pretty new to freeswitch and esl
Please advise
*Sincerely,*
*ymo*
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
