Hi Dmitry, thanks for your help, cause I've been able to set G729 when needed. What did the trick is the use of 'absolute_codec_string' defined using application set. I already tried to use this variable but using it like this: <action application="bridge" data="{absolute_codec_string='G729'}sofia/gateway/${default_gateway}/$1"/> But I've never been successful using it this way. When I tried: <action application="set" data="absolute_codec_string=G729"/> Everything went fine. If others could check that absolute_codec_string doesn't work as expected when used with application bridge and that it's not related to my setup (I don't think so, but...), I'll open a jira ticket for the devs. regards, rod Dmitry Bely a écrit :
I had a similar problem when I needed to talk to a gateway using g729 while g711 was used by default. The following works for me:
vars.xml (...) <X-PRE-PROCESS cmd="set" data="global_codec_prefs=PCMU,PCMA,G7221@32000h,G7221@16000h,G722,GSM,G729,G723"/> <X-PRE-PROCESS cmd="set" data="outbound_codec_prefs=PCMU,PCMA,GSM,G729,G723"/>
sip_profiles/internal.xml (...) <param name="inbound-late-negotiation" value="true"/>
dialplan/default/01_example.com.xml (...) <action application="set" data="absolute_codec_string=G729"/> <action application="bridge" data="{absolute_codec_string='G729'}sofia/gateway/${default_gateway}/$1"/>
On Fri, Sep 4, 2009 at 9:54 AM, rod<kawarod@laposte.net> wrote:
Hi Nandy,
yes already tried this, but if I use proxy_media=true, FS makes no control on the content of the RTP stream. But the pbm is that I need to use this: http://wiki.freeswitch.org/wiki/Misc._Dialplan_Tools_start_dtmf_generate This function enables transcoding of SIP_INFO or RFC2833 to Inband DTMF in G711
But this feature doesn't work if I'm using proxy_media=true.
In fact my setup is the following:
CPE using G711A, G729 and SIP INFO for DTMF PEER_A using G729 only and RFC_2833 PEER_B using G711 and SIP INFO
I have been able to make this works, with proxy_media=true for PEER_B cause I don't need transcoding of DTMF (SIP INFO to SIP INFO). For PEER_A, proxy_media is set to false (default) cause I need transcoding SIP INFO to RFC2833. I'm able to use G729 using codec_negotiation=greedy and setting G729 with highest priority on my internal profile.
But the pbm is that I need to add PEER_C. PEER_C needs G711 with transcoding DTMF from SIP_INFO to Inband.
And this is where I'm stuck, cause using "greedy settings and G729 with priority 1 in my codec list and proxy_media=false" force FS to negotiate G729 on leg A. But Leg B is willing to use G711 and FS is unable to transcode G729 <---> G711.
I was wondering if there is a way for FS to force the codec order on Leg A with some knowledge of the preferred codec on Leg B, ie I know that Leg B will always use G711 so that I want to biase the SDP answer on Leg A based on this fact.
regards, rod
Nandy Dagondon a écrit :
rod,
have you tried this? http://lists.freeswitch.org/pipermail/freeswitch-users/2008-March/002199.htm...
/nandy
On Thu, Sep 3, 2009 at 2:50 PM, rod <kawarod@laposte.net <mailto:kawarod@laposte.net>> wrote:
Hi Michael,
I did some tests but I haven't been successful, so there is what I'm trying to achieve:
On A leg, my phone is using: PCMA and G729 (in this priority order)
With PEER A, I want to use only G729 (thats is the only codec that this PEER support), so that the RTP flow will be: Phone-----G729----FS-----G729-----PEER_A
With PEER B, I want to use only G711, so: Phone-----G711----FS-----G711-----PEER_B
In fact, I'd like to force FS announcing the codec list priority based on the priority of the codec announced by the PEER, cause FS is unable to transcode G729 <--> G711.
Tried a lot of things (greedy for codec-negociation, late_codec, disable_transcoding, codec-prefs) without success.
If you have some clue.
regards, rod
Michael Collins a écrit : > Check out this page: > http://wiki.freeswitch.org/wiki/Codec_negotiation > > Late negotiation will probably let you handle all the cases you need. > -MC > > On Mon, Aug 31, 2009 at 8:00 AM, rod <kawarod@laposte.net <mailto:kawarod@laposte.net> > <mailto:kawarod@laposte.net <mailto:kawarod@laposte.net>>> wrote: > > Hi all, > > I'm wondering if I can do something like this: > - in my internal profile, I have this because of some PEER > using G729: > - <param name="disable-transcoding" value="true"/> > > But for a specific PEER, I'd like to activate transcoding: > - for this PEER, only G711 is used > - I'd like to transcode DTMF SIP INFO or RFC2833 to INBAND > > So in my dialplan, I tried before bridging: > > - <action application="set" data="disable-transcoding=false"/> > - <action application="start_dtmf_generate" data="true"/> > > But I still see RFC2833 events between my FS and PEER and the DTMF are > not working. > > So 2 questions: > - does application "start_dtmf_generate" requires transcoding > - if yes, can I set the variable disable-transcoding in my dialplan > > regards, > rod
- Dmitry Bely
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org