are you doing any nat into the other subnets? virtual machines make things much more confusing... :-) do you mind busting out some ascii network diagramming action? 2010/7/15 Тарас Гірник <taras.p.gyrnik@gmail.com>:
2010/7/14 broken dash <brokendash@gmail.com>
What device is 172.20.252.5? Also what are the route tables on each machines, vmachine, etc.
Subnet 192.168.1.0/24 is directly connected to machine on eth0 192.168.1.128 is on private venet device on vmachine and have it's complicated route through kernel. Public subnet /29 is located on dev eth1 on machine, 1 ip from that subnet is on same venet0 on Vmachine. Default route is also here. Complete interface eth2 is derived to Vmachine and have it's additional route to network 172.20.252.0/24 to 172.20.252.5 (as far as i can recognize it's just an DSL modem) The problem is actually that the routing seems to be ok, when i call something outside through peer 172.20.252.2 i see initial SIP packets routes ok but after that there's no rtp transmitted over eth2. In addition to this i'm not sure i handle 3 subnets configuration correctly with that internal-2 profile because i really don't find anything beside 2-nic examples and faqs.
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org