I utilized the "Mad Boss" intercom section of the sample dialplan to set up a paging scenario. This worked great on some slower PC's (and slightly older FS builds). I wa utilizing apx 25 stations on a PIII 650Mhz PC. It takes a few seconds for the call setup, but otherwise works and sounds great. I Recently I attempted to move my paging setup (XML files) from the PIII to a 2xXeon 3.4GHz server running VM. My results surprised me. The sound quality is great, but the call setup changed significantly. While the PIII took a while to setup, I was able to communicate soon after the call setup. On the VM machine, the call setup goes quickly and then I hear 25 conf. entrance tones on all of the destinations as the conf. is set up. Can I eliminate the conference announce tones and have just one announce tone...or none? The following is one of the paging groups I defined: <extension name="paging01"> <condition field="destination_number" expression="^1999$"> <action application="set" data="conference_auto_outcall_caller_id_name=Page1"/> <action application="set" data="conference_auto_outcall_caller_id_number=1999"/> <action application="set" data="conference_auto_outcall_timeout=60"/> <action application="set" data="conference_auto_outcall_flags=mute"/> <action application="set" data="conference_auto_outcall_prefix={sip_auto_answer=true,execute_on_answer='bind_meta_app 2 a s1 transfer::intercept:${uuid} inline'}"/> <action application="set" data="sip_exclude_contact=${network_addr}"/> <action application="conference_set_auto_outcall" data="${group_call(pagezone01)}"/> <action application="conference" data="paging1@default+flags{endconf|deaf}"/> </condition> </extension>