On Mon, Feb 01, RR wrote:
Hi Folks,
As I continue to learn configuring FS, I am trying to use FS as a peering switch sending a call to our SBC on the other side of the pond (across the pacific) where the IP address of the FS (in the US) is configured to receive traffic from. In this case no registration is required by the sending gateway to make calls through the system overseas as its IP address is in the "known" gateways (ACL) list.
I allowed calls in to my pbx from a specific ip in the dialplan with out an acl or a gateway by putting a statement like <extension name="fjc-pbx-inbound"> <condition field="network_addr" expression="^2001\:470\:XXXX\:XXXX\:X:X\:X\:X$"/> <condition field="destination_number" expression="^(.*)$"> <action application="transfer" data="$1 xml default"/> </condition> </extension> in the public section of the dialplan. In this example you see that it is a ipv6 address. This could easily be replaced with a ipv4 address like the level3 address 4.3.2.1. There are other ways to do this with a gateway if you so choose. --FC