Hi MC, thank you for the answer. To your question, all call legs in this scenario (outgoing or incoming direction) are connected over a sip trunk of a pbx. Scenario: My CTI | A | | event socket V | Freeswitch Sip Trunk <- PBX -> My Client control (CTI) the call legs over the event socket interface and the call legs are only legs over the sip trunk to or from the PBX. After some tests i have found a possible solution: - Leg A and Leg B are bridged (all legs get the flag park_after_bridge = true) - For Consultation i park Leg B and transfer this Leg to Moh in my default context of my dialplan - i originate Leg C and bridge this Leg with Leg A (Leg C have the flag park_after_bridge = true too) Consultation is comlete now. - with the principle same think i can toggle Leg A <-> Leg B and Leg A <-> Leg C. What is your think for this solution? I have tested this on the FS CLI and it works. Von: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] Im Auftrag von Michael Collins Gesendet: Freitag, 14. September 2012 19:13 An: FreeSWITCH Users Help Betreff: Re: [Freeswitch-users] Consultation Call via event_socket interface Hi Alex, Welcome to the FreeSWITCH mail list! First question for you: what kind of telephone are you using? The reason I ask is that this kind of function is trivially achieved with a good hard phone, like a Polycom, Yealink, Snom, or Cisco with two or more line keys. If you can use a hard phone w/ multiple line keys then you don't even need to mess with the dialplan, uuid_bridge, etc. -MC On Fri, Sep 14, 2012 at 12:24 AM, Alexander Haugg <Alexander.Haugg@c4b.de<mailto:Alexander.Haugg@c4b.de>> wrote: Hi All, I'm new on the mailing list. I have a problem with a call scenario. - Channel A and channel B are bridged (A is my own channel and B is my calling partner) - Now i set channel B on hold with the command "uuid_hold xxx" and create a new channel to C with the command: bgapi originate {channel_csid=num,accountcode=num,origination_caller_id_name='num@ip',origination_caller_id_number=num@ip}sofia/external/num@ip &park this works correctly, the partner C answer and the channel is established. - Now the Problem: I try to bridge the channel a to channel c with the uuid_bridge command, now the channel b will hangup, why? The variable hangup_after_bridge is by default false. Other problem: channel A can hear the voice of channel C but not speak with him, channel C can hear and speak. But this problem is not the important think at the moment. Is there a general problem in my plan to do that? Is it a better plan to do this over the dialplan? The next step in this scenario is to toggle the connection A -> B and A -> C. Thanks for your help! Nice regards, Alex _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org<mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org -- Michael S Collins Twitter: @mercutioviz http://www.FreeSWITCH.org http://www.ClueCon.com http://www.OSTAG.org