That is very interesting and I will almost certainly be trying it out with an SPA3102, but I still don't have a complete grasp of VOIP -> PSTN bridging, whatever the devices. A SIP client normally makes a call by contacting a SIP server somewhere and telling it the number to be called. But how can it do this when it needs to be done through a gateway onto PSTN? The gateway is not a SIP server of any sort, just another client, so how can the calling SIP client/device contact the gateway and say "call this number"? It is this basic process flow that I want to get my head around. Once I have that basic understanding I am in a better position to try and configure the various devices. Without that, I might as well be pushing buttons at random. So I'd appreciate it if someone could please explain this process and enlighten me. On 10 Aug 2010, at 13:09, Rupa Schomaker wrote:
http://wiki.freeswitch.org/wiki/SPA3102_FreeSwitch_HowTo
On Tue, Aug 10, 2010 at 2:17 AM, Ken Gillett <ken@ukgb.net> wrote: Well I did try a Linksys/Cisco/Sipura 3102 but it's a configuration nightmare. The problem mainly is as I said, I cannot figure how VOIP -> PSTN bridging can be achieved whatever the gateway device.
A SIP client (VOIP phone, softphone etc) uses only the SIP URI to make the call. From that piece of data it gets the SIP domain and the ID of the user. So how is the gateway able to be inserted in this process. The SIP client has no knowledge of this device and no way to include that third piece of data into its process.
Obviously such gateways do exist, but I do not yet understand how the process works. Some advice on the basic process flow would therefore assist me to set up what I need irrespective of what devices I am using. Sorry to be so ignorant about this, but anyone able and willing to help with an explanation?
On 10 Aug 2010, at 04:23, Rupa Schomaker wrote:
I'm pretty sure the zoom does not support sip originated calls to the FXO port. It's FXO port is strictly used as failover or selectable via dialplan when the call originates from the FXS port (eg: dial 9 first to get FXO).
Try:
cisco 3102 audiocodes grandstream
for atas that support full FXS/FXO operation.
On Mon, Aug 9, 2010 at 1:49 PM, Ken Gillett <ken@ukgb.net> wrote: I am actually trying this out with a Zoom 5801 which with an FXO and FXS port and the ability to bridge in both directions can apparently do what I require, but I cannot get my head around what I am even trying to get it to do. And this is before I've even thought about bringing FreeSwitch into the equation.
Ken G i l l e t t _/_/_/_/_/_/_/_/