We have 2 freeswitches, one is configured as SBC and one as communication server behind. We have the following setup. * Sip Users are registered on the SBC. * Gateways connected to carriers are also connected to the SBC * On the SBC we use xml dialplan, on the other freeswitch we use mod_event_socket, the dialplan is served by an external process. Now, the following scenario: 1. An inbound call is received from the gateway on SBC and bridged to the second freeswitch 2. The second freeswitch is executing the dialplan via mod_event_socket: 1. Play an announcement and then 2. Bridge to the registered softphone The issue. The softphone is registered on the SBC, so a bridge to the user who is registered with the softphone is not possible. Even if I share the registration database, the second freeswitch does not show the user registered. Is there a way to get this setup to work ? Is this Setup in general a good idea, or is it better to create a separate profile on the second freeswitch - then the bridge is possible. But then the second freeswitch is also connected to the internet …? Thanks Markus