Thanks for your reply Christopher! Can you please specify how should I edit spandsp.conf (tones section) to add my tone? I was trying for hours but didn't get any result, I just can't get the logic and I'm struggling. Cheers, Alex
From: Christopher Rienzo <cmrienzo@gmail.com> To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> Cc: Date: Mon, 20 Jun 2016 08:59:32 -0400 Subject: Re: [Freeswitch-users] Tone detection issue Use spandsp_start_tone_detect instead. It's better suited for detecting tones + cadence.
On Sun, Jun 19, 2016 at 10:58 PM, Alexandru Covalschi <568691@gmail.com> wrote:
Hi list,
I have an issue using tone_detect. The thing is I must detect two very short tones - 1400 Hz and 2300 Hz 100ms coming one after another (with 100 ms pause I suppose) after ~2 seconds the call is answered. I have pretty accurate wav file, in audacity I see pikes are 1400 and 2296. I've seen that in spandsp sources it is said that accuracy is ~3% so that should be enough, However tones aren't detected even if I set:
<action application="tone_detect" data="tone_1_0 1395 r 0 set tone_first=true 1"/> <action application="tone_detect" data="tone_2_0 2295 r 0 set tone_second=true 1"/> <action application="tone_detect" data="tone_1_1 1396 r 0 set tone_first=true 1"/> <action application="tone_detect" data="tone_2_1 2296 r 0 set tone_second=true 1"/> <action application="tone_detect" data="tone_1_2 1397 r 0 set tone_first=true 1"/> <action application="tone_detect" data="tone_2_2 2297 r 0 set tone_second=true 1"/> <action application="tone_detect" data="tone_1_3 1398 r 0 set tone_first=true 1"/> <action application="tone_detect" data="tone_2_3 2298 r 0 set tone_second=true 1"/> <action application="tone_detect" data="tone_1_4 1399 r 0 set tone_first=true 1"/> <action application="tone_detect" data="tone_2_4 2299 r 0 set tone_second=true 1"/> <action application="tone_detect" data="tone_1_5 1400 r 0 set tone_first=true 1"/> <action application="tone_detect" data="tone_2_5 2300 r 0 set tone_second=true 1"/> <action application="tone_detect" data="tone_1_6 1401 r 0 set tone_first=true 1"/> <action application="tone_detect" data="tone_2_6 2301 r 0 set tone_second=true 1"/> <action application="tone_detect" data="tone_1_7 1402 r 0 set tone_first=true 1"/> <action application="tone_detect" data="tone_2_7 2302 r 0 set tone_second=true 1"/>
Tried to do same using spandsp_start_tone_detect(), but I have no idea how to edit spandsp.conf to add a tone matching my needs.
Can someone give me any clue? Any parameter I need to change in sources to obtain what I need?
Debian Jessie FreeSWITCH version: 1.6.6-13-d2d0b32~64bit (-13-d2d0b32 64bit)
Thanks in advance! -- Alexandru Covalschi ABRISS-Solutions VoIP engineer and system administrator tel: +37367398493 web: http://abriss.solutions/ <http://abs-telecom.com/>
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-
-- Alexandru Covalschi ABRISS-Solutions VoIP engineer and system administrator tel: +37367398493 web: http://abriss.solutions/ <http://abs-telecom.com/>