Carlos, if what you want to achieve is to use a T1/E1 line that is remote, so not connected physically to your FS box, I think you need this: http://support.red-fone.com/index.php?_m=knowledgebase&_a=viewarticle&kbarti... There could be other vendors, I have absolutely no knowledge about this, I just found out about it recently. I don't even know if it works. David Ponzone Direction Technique email: david.ponzone@ipeva.fr tel: 01 74 03 18 97 gsm: 06 66 98 76 34 Service Client IPeva tel: 0811 46 26 26 www.ipeva.fr - www.ipeva-studio.com Ce message et toutes les pièces jointes sont confidentiels et établis à l'intention exclusive de ses destinataires. Toute utilisation ou diffusion non autorisée est interdite. Tout message électronique est susceptible d'altération. IPeva décline toute responsabilité au titre de ce message s'il a été altéré, déformé ou falsifié. Si vous n'êtes pas destinataire de ce message, merci de le détruire immédiatement et d'avertir l'expéditeur. Le 21/05/2010 à 04:37, Carlos Lopez a écrit :
Hi all,
I am planning to deploy some test over a voip server, I'll be setting up two voip servers, but I want to know if there are devices that can take one T1/E1 PSTN lease and then transform that signal into IP and connect it to a ethernet card on each voip server. Also I'd like to know if I can do the same with the FXS analog phones which will be connected to a telphone patch panel and from that patch panel to a TDM 50pins PCI card, for example:
1- phone1<--->||Telephone ||<--Amphenolcable-->|Failover|<--->*1 phone2<--->||patch panel|| |device..|<--->*2
2- (*1-VOIP_SRV1)<--IP-->|Ethernet|<--TDMoE--->|Failover|<--->T1/E1 (*2-VOIP_SRV2)<--IP-->|Switch | |device |
What are the best IP to analog phones PCI cards supported by Freeswitch, any hints?.
Thanks in advanced for your help.
Carlos.
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org