make openzap is the correct way to build when using with openzap/freeswitch. If you are having issues with this you should check with sangoma support as to why that build of the drivers is not supporting it properly and what version you should be using. Mike On Nov 30, 2009, at 5:41 AM, François Legal wrote:
I did manage to build these drivers, but maybe you're not doing it the right way. Sangoma document state that the drivers should be built by using their ./Setup script that does all that is required.
I did use ./Setup install which builds the kernel modules, the wanrouter utilities and install all the required stuff.
Then you can go back to freeswitch and build the mod_openzap/libopenzap.
François
On Mon, 30 Nov 2009 15:19:43 +0530, Neil Patel <neilp@cs.stanford.edu> wrote:
Hi All,
I am currently installing a Sangoma A102 card to work with FS using wanpipe drivers (OS = Ubuntu Jaunty). The problem is I can't get openzap-related modules to compile:
cd wanpipe-3.5.6.5/ make openzap ... make[2]: Leaving directory `/usr/src/wanpipe-3.5.6.5/api/libsangoma' make[1]: Leaving directory `/usr/src/wanpipe-3.5.6.5/api/libsangoma' make -C api/libstelephony clean make[1]: Entering directory `/usr/src/wanpipe-3.5.6.5/api/libstelephony' make[1]: *** No rule to make target `clean'. Stop. make[1]: Leaving directory `/usr/src/wanpipe-3.5.6.5/api/libstelephony' make: *** [all_lib] Error 2
The libstelephony directory has no Makefile in it. Why is it missing? Is there a version of wanpipe drivers that will work? I have been unsuccessful with 3.4.4 and 3.5.6 in similar fashion.
Thanks, Neil
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org