Hi everybody, I have a problem with "Alphanumeric to numeric user mapping" I have done like it's written here : Alphanumeric to numeric user mapping Say you want a user's id to be alphanumeric (like an email username), such as johnsmith@pbx.example.com. These users have alphanumeric usernames in their sip phone config, but you want to map them from their sip username to a numeric extension, and vice versa. As of version 1.0.4, Freeswitch makes this trivial to accomplish. A user's ID can be any alphanumeric string, and this can be simply tied to an extension number using the 'number-alias' property. This property creates an aliased directory entry that points to the alphanumeric user entry. *NOTE: When using this attribute, you must be careful not to create a directory collision by having another user whose ID is the same as another user's alias* Here is an example from the user directory: <user id="johnsmith" number-alias="1001"> <!-- Insert the usual user configuration variables and params here, including user password, voicemail password, caller ID info, etc --> </user> So when a user dials extension number 1001, your dialplan can use the 'user_data' function to look up the ID attribute associated with that number alias. In the default dialplan, the 'Local Extension' section can be made to work with a small change to the 'bridge' line: <action application="bridge" data="user/${user_data(${dialed_extension}@${domain_name} attr id)}@${domain_name}"/> *NOTE: Using this user_data function in combination with mod_xml_curl will generate an additional request each time the user_data function is called. Note that it is already called once in the Local Extension section to determine the callgroup. Beware of performance implications of this with high-volume systems.* But when I want to call my alias-number, FS says "No Route, Abording" My version of FreeSWITCH is the 1.0.4pre9. Do you have any ideas ? Did I forget something to do? Thanks -- Jonathan BAROU SQLI LYON - CRCI jbarou@sqli.com lyon.crci@sqli.com