Hi, I have a VERY simple FS setup. 1) Calls come in and go out via Vitelity. (I just route to their IP address, don't even need a gateway.) 2) I have users registered remotely with anything from a single SIP phone to an asterisk box. 3) Basically, I am a "pass through" of calls to and from Vitelity. I have my user registering their phones on my "default" context. Calls that come back in on a DID route through the public context. Outgoing calls work perfectly. My problem is with incoming calls. My users register with their DID as their username. So, when a call comes in on "323-555-1212", I want to route it to the device registered with the username of "3235551212". With my current setup, it is getting routed over to the default context, and then FS is attempting to DIAL THE DID BACK OUT. which creates a nasty loop. HOW CAN I TELL FS TO ROUTE A CALL TO A REGISTERED USER AS OPPOSED TO DIALING OUT??? My guess is that's its an adjustment to the "transfer" application in my public context??? Thanks, -Noah ----------------------------------------------------------------------------------------------------- I can call out just fine using the following in my dialplan: <context name="default"> <extension name="Vitelity"> <condition field="destination_number" expression="^(1{0,1}\d{10}) $"> <action application="set" data="effective_caller_id_number=12223334444"/> <!--<action application="bridge" data="sofia/gateway/vitelity/$1"/>--> <action application="bridge" data="sofia/external/$1@outbound1.vitelity.net "/> </condition> </extension> </context> <context name="public"> <extension name="inbound"> <condition field="destination_number" expression="^(3235551212)$"> <action application="transfer" data="$1 XML default"/> </condition> </extension> </context>