Yes it was loaded. Now it is working, I don’t know why, I change the hardware Settings (Micro, Camera, …) and then it works. Von: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] Im Auftrag von Ítalo Rossi Gesendet: Freitag, 26. August 2016 16:49 An: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> Betreff: Re: [Freeswitch-users] mod_verto and vc are not working Do you have mod_rtc loaded? On Fri, Aug 26, 2016 at 6:45 AM, Alexander Haugg <Alexander.Haugg@c4b.de<mailto:Alexander.Haugg@c4b.de>> wrote: I was installing this setup: https://freeswitch.org/confluence/display/FREESWITCH/Debian+8+Jessie#Debian8... The problem is, the client 1008 calls the client 1010 and the client 1010 do answer. The signaling part is connected successfully. But client 1008 and 1010 show the black video field only and voice is don’t working too. In the wireshark trace on the freeswitch host I can see, the freeswitch received from the client 1008 and 1010 the rtp streams, but he send the streams not to the other side. I can’t see any outbound rtp streams. The only one error message in the CLI output is: 2016-08-26 11:37:59.642048 [ERR] switch_core_session.c:511 Could not locate channel type FreeSWITCH Version 1.6.9-16-d574870~64bit (-16-d574870 64bit) on Debian 8.5 The config is default with the adapted IPs What can I do to locate the Problem? Von: freeswitch-users-bounces@lists.freeswitch.org<mailto:freeswitch-users-bounces@lists.freeswitch.org> [mailto:freeswitch-users-bounces@lists.freeswitch.org<mailto:freeswitch-users-bounces@lists.freeswitch.org>] Im Auftrag von Alexander Haugg Gesendet: Donnerstag, 25. August 2016 14:39 An: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org<mailto:freeswitch-users@lists.freeswitch.org>> Betreff: Re: [Freeswitch-users] mod_verto and https://webrtc.freeswitch.org/verto/index.html#page-main Thanks a lot, that’s the solution. Von: freeswitch-users-bounces@lists.freeswitch.org<mailto:freeswitch-users-bounces@lists.freeswitch.org> [mailto:freeswitch-users-bounces@lists.freeswitch.org] Im Auftrag von Marcel Haldemann Gesendet: Mittwoch, 24. August 2016 18:03 An: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org<mailto:freeswitch-users@lists.freeswitch.org>> Betreff: Re: [Freeswitch-users] mod_verto and https://webrtc.freeswitch.org/verto/index.html#page-main If u start to play with webrtc and Freeswitch I’d recommend to install FS + cert + verto communicator using the script here: https://freeswitch.org/confluence/display/FREESWITCH/Debian+8+Jessie#Debian8... note: change hostname and ip in the script. Then just go to “https://yourhostname.com/vc” and you should have a working verto server and client. Note: change the default password to get rid of the 10 sec delay or remove the delay in the dial plan. Von: freeswitch-users-bounces@lists.freeswitch.org<mailto:freeswitch-users-bounces@lists.freeswitch.org> [mailto:freeswitch-users-bounces@lists.freeswitch.org] Im Auftrag von Alexander Haugg Gesendet: Mittwoch, 24. August 2016 15:24 An: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org<mailto:freeswitch-users@lists.freeswitch.org>> Betreff: [Freeswitch-users] mod_verto and https://webrtc.freeswitch.org/verto/index.html#page-main Hi, it is my first time with mod_verto. The certificate is generated like described here: https://webrtc.freeswitch.org/verto/index.html#page-main And the ca.crt is installed on the client pc. But the following error message is again: 2016-08-24 15:03:47.044880 [INFO] mod_verto.c:4025 192.168.241.2:43246<http://192.168.241.2:43246> Client Connect. 2016-08-24 15:03:47.044880 [INFO] mod_verto.c:1978 192.168.241.2:43246<http://192.168.241.2:43246> Starting client thread. 2016-08-24 15:03:47.084876 [DEBUG] mod_verto.c:1825 192.168.241.2:43246<http://192.168.241.2:43246> WS SETUP FAILED [] 2016-08-24 15:03:47.084876 [INFO] mod_verto.c:2005 192.168.241.2:43246<http://192.168.241.2:43246> Ending client thread. 2016-08-24 15:03:47.084876 [INFO] mod_verto.c:2013 192.168.241.2:43246<http://192.168.241.2:43246> Thread ended What can I do? Is the certificate the problem? The Client PC and the Freeswitch PC are in the same Network Cluster. The Freeswitch PC is a Debian 8.5 system. Thanks a lot Alex _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org<mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org -- Ítalo Rossi italo@freeswitch.org<mailto:italo@freeswitch.org>