Hi all, I have downloaded the latest freeswitch 1.0.6. I configured my sangoma card with libpri as told in http://wiki.freeswitch.org/wiki/Openzap.sangoma.libpri I use wanpipe-3.5.10.10 and libpri-1.4.10.2. openzap.conf [span wanpipe PRI_1] name => OpenZAP number => 1 trunk_type => e1 b-channel => 1:1-15 b-channel => 1:17-31 [span wanpipe PRI_2] name => OpenZAP number => 2 trunk_type => e1 b-channel => 2:1-15 b-channel => 2:17-31 openzap.conf.xml: <configuration name="openzap.conf" description="OpenZAP Configuration"> <settings> <param name="debug" value="1"/> </settings> <libpri_spans> <span name="PRI_1"> <param name="node" value="cpe"/> <param name="switch" value="euroisdn"/> <param name="dialplan" value="XML"/> <param name="context" value="public"/> <param name="l1" value="alaw"/> </span> <span name="PRI_2"> <param name="node" value="net"/> <param name="switch" value="euroisdn"/> <param name="dialplan" value="XML"/> <param name="context" value="public"/> <param name="l1" value="alaw"/> </span> </libpri_spans> </configuration> I started wanrouter and after that I started freeswitch. I got core dumped immediately after saying auto-loaded libpri. Here is the freeswitch log. http://pastebin.freeswitch.org/12712