You'll have to do the manual assignments of your IP's in each profile. You can't depend on the automatic stuff we have in our default configs. hint sip-ip and rtp-ip need to be set for each profile to the proper values. /b On Feb 7, 2012, at 10:40 AM, rico-freeswitch@ricozome.net wrote:
Hi guys,
I'm facing a stupid issue on a fresh installed Debian Squeeze (amd64) server with two NICs, and FreeSwitch bottstraped from Git tree :
- eth0 is connected to the local LAN (172.16.96.3/24) - eth1 is connected to Internet and have a public IP address. To be exact, eth0 is on a DMZ, but anyway, it's a RFC1918 address.
FS is : FreeSWITCH Version 1.0.head (git-d2c9fb5 2012-02-06 14-12-22 -0600)
The problem is when I start the server with its default config, mod_sofia automatically binds into the public IP address, and nothing listens on the local IP address !
thougth the CLI, I get this : freeswitch@internal> sofia status Name Type Data State ================================================================================================= 194.79.xxx.xxx alias internal ALIASED internal profile sip:mod_sofia@194.79.xxx.xxx:5060 RUNNING (0) internal-ipv6 profile sip:mod_sofia@[::1]:5060 RUNNING (0) external profile sip:mod_sofia@194.79.xxx.xxx:5080 RUNNING (0) external::example.com gateway sip:joeuser@example.com NOREG ================================================================================================= 3 profiles 1 alias freeswitch@internal> eval ${local_ip_v4} 194.79.xxx.xxx
I have to precise it is my first attemps to install FS, and I'm discovering the software, so I may forget something... But I didn't found a way to force FS to link "internal" profile with the local IP address. I also could modify sip_profiles/internal.xml and hardcode the correct IP address, but my feeling is it's not the right way, and I guess it would probably have some side effects on the setup ?
Last, I tried both old 1.0.6 branch and lastest Git tree, both with compiled packages "ala" Debian way, and bootstraped, and I always got the same behavior...
So my question is simple : is this normal, ? and how should I handle FS setup with mutiple NICs ?
Thanks for your help,
-- Eric Belhomme
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Brian West FreeSWITCH Solutions, LLC Phone: +1 (918) 420-9266 Fax: +1 (918) 420-9267 brian@freeswitch.org http://www.freeswitch.org