Danke für die Information Gesendet mit meinem HTC ----- Reply message ----- Von: "Madovsky" <infos@madovsky.org> An: "FreeSWITCH Users Help" <freeswitch-users@lists.freeswitch.org> Betreff: [Freeswitch-users] fax and jpg to tiff Datum: Do., Apr. 14, 2011 18:29 Steve the link below is the same thread you had with callweaver http://www.mail-archive.com/callweaver-users@callweaver.org/msg01241.html thanks ----- Original Message ----- From: "Steve Underwood" <steveu@coppice.org> To: "FreeSWITCH Users Help" <freeswitch-users@lists.freeswitch.org> Sent: Thursday, April 14, 2011 11:59 AM Subject: Re: [Freeswitch-users] fax and jpg to tiff
Hi Madovsky,
The standard width for a normal sized fax, whether it is standard, fine or super-fine resolution length-wise, is 1728 pixels. Wider faxes (e.g. A3) are possible, but it is rare to find a machine which supports them.
Steve
On 04/14/2011 11:20 PM, Madovsky wrote:
Hi Steve,
if you talk about this line
Image width (200 pixels) not an acceptable FAX image width I tried many different size but it says always the same. what image width is acceptable usually ?
Thanks
----- Original Message ----- From: "Steve Underwood"<steveu@coppice.org> To: "FreeSWITCH Users Help"<freeswitch-users@lists.freeswitch.org> Sent: Thursday, April 14, 2011 9:25 AM Subject: Re: [Freeswitch-users] fax and jpg to tiff
Hi Madovsky,
Your log says very clearly what is wrong with the file you are trying to send. What further information are you looking for?
Steve
On 04/14/2011 12:05 PM, Madovsky wrote:
is there the spandsp log 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .... ...0= Store and forward Internet fax (T.37): Not set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .... .0..= Real-time Internet fax (T.38): Not set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .... 0...= 3G mobile network: Not set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 ..0. ....= V.8 capabilities: Not set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .0.. ....= Preferred octets: 256 octets 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .... ...0= Ready to transmit a fax document (polling): Not set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .... ..1.= Can receive fax: Set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 ..10 11..= Supported data signalling rates: V.27 ter, V.29, and V.17 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .1.. ....= R8x7.7lines/mm and/or 200x200pels/25.4mm: Set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 1... ....= 2-D coding: Set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .... ..00= Recording width: 215mm +- 1% 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .... 10..= Recording length: Unlimited 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .111 ....= Receiver's minimum scan line time: 0ms at 3.85 l/mm; T7.7 = T3.85 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 1... ....= Extension indicator: Set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .... ..0.= Compressed/uncompressed mode: Compressed 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .... .0..= Error correction mode (ECM): Non-ECM 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .0.. ....= T.6 coding: Not set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 1... ....= Extension indicator: Set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .... ...0= "Field not valid" supported: Not set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .... ..0.= Multiple selective polling: Not set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .... .0..= Polled sub-address: Not set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .... 0...= T.43 coding: Not set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 ...0 ....= Plane interleave: Not set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 ..0. ....= Voice coding with 32kbit/s ADPCM (Rec. G.726): Not set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .0.. ....= Reserved for the use of extended voice coding set: Not set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 1... ....= Extension indicator: Set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .... ...1= R8x15.4lines/mm: Set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .... ..0.= 300x300pels/25.4mm: Not set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .... .0..= R16x15.4lines/mm and/or 400x400pels/25.4mm: Not set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .... 0...= Inch-based resolution preferred: Not set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 ...1 ....= Metric-based resolution preferred: Set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 ..0. ....= Minimum scan line time for higher resolutions: T15.4 = T7.7 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .0.. ....= Selective polling: Not set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 1... ....= Extension indicator: Set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .... ...1= Sub-addressing: Set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .... ..0.= Password: Not set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .... .0..= Ready to transmit a data file (polling): Not set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 ...0 ....= Binary file transfer (BFT): Not set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 ..0. ....= Document transfer mode (DTM): Not set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 .0.. ....= Electronic data interchange (EDI): Not set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 0... ....= Extension indicator: Not set 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Selected compression T.4 2-D (2) 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Trying to send file '/1302753792.tiff' 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Start sending document 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Minimum bits per row will be 0 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Starting page 1 of transfer 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Image width (200 pixels) not an acceptable FAX image width 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 The far end is incompatible 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Changing from state 18 to 3 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Tx: DCN with final frame tag 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Tx: ff 13 fb 2011-04-14 00:03:30.564178 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 HDLC signal status is Carrier down (-1) in state 3 2011-04-14 00:03:30.564178 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Changing from phase T30_PHASE_B_RX to T30_PHASE_D_TX 2011-04-14 00:03:30.564178 [DEBUG] mod_spandsp_fax.c:296 FLOW FAX Set rx type 0 2011-04-14 00:03:30.564178 [DEBUG] mod_spandsp_fax.c:296 FLOW FAX Set tx type 4 2011-04-14 00:03:31.624981 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Send complete in phase T30_PHASE_D_TX, state 3 2011-04-14 00:03:31.705007 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Send complete in phase T30_PHASE_D_TX, state 3 2011-04-14 00:03:31.705007 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Disconnecting 2011-04-14 00:03:31.705007 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Changing from phase T30_PHASE_D_TX to T30_PHASE_E 2011-04-14 00:03:31.705007 [DEBUG] mod_spandsp_fax.c:296 FLOW FAX Set rx type 0 2011-04-14 00:03:31.705007 [DEBUG] mod_spandsp_fax.c:296 FLOW FAX Set tx type 1 2011-04-14 00:03:31.705007 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Changing from state 3 to 2 2011-04-14 00:03:32.704744 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 Send complete in phase T30_PHASE_E, state 2
----- Original Message ----- *From:* Madovsky<mailto:infos@madovsky.org> *To:* freeswitch-users@lists.freeswitch.org <mailto:freeswitch-users@lists.freeswitch.org> *Sent:* Wednesday, April 13, 2011 11:33 PM *Subject:* fax and jpg to tiff
sorry I don't have the personal email of Steve Underwood (I saw a thread of him related of this subject), it's about a problem of spandsp txfax and jpeg files. I didn't succeed to find the right conversion to make the far end accept the fax. I get always "far end cannot receive at the size of the image". this problems occurs only from jpeg to tiff conversion. I use imagemagick for that : sudo /usr/bin/convert -page Letter -density 204x196 -resize 1728x1184 -units pixelsperinch -monochrome -compress Fax <fileToConvert> <fileToSave> I tried numrous options but no luck. Thanks
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org