On Friday 25 April 2014 21:19:01 Yehavi Bourvine wrote:
Hi, Hello, thank you for the advice!
There might be two issues here:
1. Yealink had a bug in TLS omplementation and FreeSwitch. This has been fixed about a month ago, so make sure you are using the latest firmware. There was an update from 18 April that I just applied but it had no effect on the issue. I did a factory reset and reconfigured the phone after the update but nothing changed. 2. Make sure you set: <action application="set" data="sip_secure_media=true"/> <action application="export" data="nolocal:sip_secure_media=true"/> <action application="set" data="rtp_secure_media=true"/> <action application="export" data="nolocal:rtp_secure_media=true"/>
I didn't have the ones with "nolocal". I added them however, but it still didn't make a difference. What I noticed is that the SRTP is working fine, even when I'm using TCP/UDP for SIP, it sends the correct messages and the audio is working just fine (all other phones are set to mandatory SRTP so they can't establish a call when SRTP is not working on the other end). However I tried TLS with unencrypted media and that one failed too. I thought it's a NAT issue so I enabled a stun server on the phone, but strangely enough, that had no effect either. I'll try updating to latest git as this installation is a bit outdated, but since everything else is working I'm pretty confident it's not FreeSWITCH's fault. Thanks for the tips!
before calling the phone (some of the above lines might be superfluous, but I didn't bother to check it).
Regards, __Yehavi:
2014-04-25 16:38 GMT+03:00 Iskren Hadzhinedev <iskren.hadzhinedev@ikiji.com>
Hello everyone,
Just got a couple of new Yealink T48G phones and I am having a couple of rather weird (at least for me) issues with them.
Whenever I enable TLS authentication on the phones, they register with the FreeSWITCH box but there's no media on the
outbound calls and I'm unable to get any incoming calls at all. If I switch the authentication protocol to TCP or UDP it's all
working good. I tried enabling/disabling SRTP for all 3 protocols and it kept the behaviour consistent.
All calls made are local (registered to the same FreeSWITCH box) and only these phones have any issues with calls.
I can call someone from the Yealink and then add another person in a 3-way conference.
That way the two remote parties can hear eachother, but the Yealink is dead silent.
Here's the profile on which all phones are connected:
<profile name="local">
<domains>
<domain name="all" alias="true" parse="false"/>
</domains>
<settings>
<param name="debug" value="0"/>
<param name="sip-trace" value="no"/>
<param name="sip-capture" value="no"/>
<param name="watchdog-enabled" value="no"/>
<param name="watchdog-step-timeout" value="30000"/>
<param name="watchdog-event-timeout" value="30000"/>
<param name="log-auth-failures" value="true"/>
<param name="forward-unsolicited-mwi-notify" value="false"/>
<param name="rfc2833-pt" value="101"/>
<param name="sip-port" value="5060"/>
<param name="dialplan" value="XML"/>
<param name="liberal-dtmf" value="true"/>
<param name="dtmf-duration" value="2000"/>
<param name="inbound-codec-prefs" value="SILK,OPUS,G722,PCMU,PCMA,GSM"/>
<param name="outbound-codec-prefs" value="PCMU,PCMA,GSM"/>
