Show me your wanpipe config for this span please. DMS100 should work without a problem. /b On Nov 8, 2007, at 8:00 AM, John Bittner wrote:
Hi Brian, I can use DMS100. Is there anything I am missing on the wanpipe side. If I move back to the mod_wanpipe with LIBPRI can I use NI2? I need to use the data part of wanrouter, I think I remember reading that if you use mod_wanpipe you have to be TDM only. Is this true?
What is the best way to get this sanagoma working and still keep the data stuff working.
John Bittner Simlab.net
-----Original Message----- OpenZap doesn't do NI2 just yet. Its on the to do list for the PRI stack.
/b
On Nov 8, 2007, at 3:39 AM, John Bittner wrote:
Thanks Michael but I had already tried this config. It does even like the formats. I tried testing a few configs and the only one I get a response with is
[span wanpipe] b-channel => 1:1-23 d-channel => 1:24
This gives me this error. The device listed in wanpipe is w1g1 and does not match s1c1... so I am missing something. I tried to even to go into the code to find the options but I cant find anything. I suck at programming. Anyone have any idea of the options for this or a sample config for a sangoma card.
Any help is appreciated.
Thanks
John Bittner Simlab.net
2007-11-07 17:28:10 [ERR] zap_io.c:1868 process_module_config() Cannot open zt.conf 2007-11-07 17:28:10 [DEBUG] zap_io.c:1744 load_config() found config for span 2007-11-07 17:28:10 [DEBUG] zap_io.c:1764 load_config() created span 9 of type wanpipe 2007-11-07 17:28:10 [DEBUG] zap_io.c:1777 load_config() span 9 [spanno]=[2] 2007-11-07 17:28:10 [DEBUG] zap_io.c:1777 load_config() span 9 [b- channel]=[1:1-23] 2007-11-07 17:28:10 [ERR] zap_wanpipe.c:404 wp_open_range() failure configuring device s1c1 2007-11-07 17:28:10 [ERR] zap_wanpipe.c:404 wp_open_range() failure configuring device s1c2 2007-11-07 17:28:10 [ERR] zap_wanpipe.c:404 wp_open_range() failure configuring device s1c3 2007-11-07 17:28:10 [ERR] zap_wanpipe.c:404 wp_open_range() failure configuring device s1c4 2007-11-07 17:28:10 [ERR] zap_wanpipe.c:404 wp_open_range() failure configuring device s1c5 2007-11-07 17:28:10 [ERR] zap_wanpipe.c:404 wp_open_range() failure configuring device s1c6 2007-11-07 17:28:10 [ERR] zap_wanpipe.c:404 wp_open_range() failure configuring device s1c7 2007-11-07 17:28:10 [ERR] zap_wanpipe.c:404 wp_open_range() failure configuring device s1c8 2007-11-07 17:28:10 [ERR] zap_wanpipe.c:404 wp_open_range() failure configuring device s1c9 2007-11-07 17:28:10 [ERR] zap_wanpipe.c:404 wp_open_range() failure configuring device s1c10 2007-11-07 17:28:10 [ERR] zap_wanpipe.c:404 wp_open_range() failure configuring device s1c11 2007-11-07 17:28:10 [ERR] zap_wanpipe.c:404 wp_open_range() failure configuring device s1c12 2007-11-07 17:28:10 [ERR] zap_wanpipe.c:404 wp_open_range() failure configuring device s1c13 2007-11-07 17:28:10 [ERR] zap_wanpipe.c:404 wp_open_range() failure configuring device s1c14 2007-11-07 17:28:10 [ERR] zap_wanpipe.c:404 wp_open_range() failure configuring device s1c15 2007-11-07 17:28:10 [ERR] zap_wanpipe.c:404 wp_open_range() failure configuring device s1c16 2007-11-07 17:28:10 [ERR] zap_wanpipe.c:404 wp_open_range() failure configuring device s1c17 2007-11-07 17:28:10 [ERR] zap_wanpipe.c:404 wp_open_range() failure configuring device s1c18 2007-11-07 17:28:10 [ERR] zap_wanpipe.c:404 wp_open_range() failure configuring device s1c19 2007-11-07 17:28:10 [ERR] zap_wanpipe.c:404 wp_open_range() failure configuring device s1c20 2007-11-07 17:28:10 [ERR] zap_wanpipe.c:404 wp_open_range() failure configuring device s1c21 2007-11-07 17:28:10 [ERR] zap_wanpipe.c:404 wp_open_range() failure configuring device s1c22 2007-11-07 17:28:10 [ERR] zap_wanpipe.c:404 wp_open_range() failure configuring device s1c23 2007-11-07 17:28:10 [DEBUG] zap_io.c:1777 load_config() span 9 [d- channel]=[1:24] 2007-11-07 17:28:10 [ERR] zap_wanpipe.c:404 wp_open_range() failure configuring device s1c24 2007-11-07 17:28:10 [INFO] zap_io.c:1848 load_config() Configured 0 channel(s) 2007-11-07 17:28:10 [ERR] zap_io.c:1926 zap_global_init() No modules configured! 2007-11-07 17:28:10 [ERR] mod_openzap.c:1201 mod_openzap_load() Error loading OpenZAP
-----Original Message----- John,
I don't have a Sangoma card, but if I understand the openzap stuff correctly it will replace wanpipe. I do have a tor2 clone. Here's my openzap.conf with comments below:
[span zt] name => OpenZAP number => 1 trunk_type => t1 b-channel => 1-24
[span zt] name => OpenZAP number => 2 trunk_type => t1 b-channel => 25-48
[span zt] name => OpenZAP number => 3 trunk_type => t1 b-channel => 49-71 d-channel => 72
[span zt] name => OpenZAP number => 4 trunk_type => t1 b-channel => 73-95 d-channel => 96
Note in particular spans 3 and 4. Span 3 is a working PRI where I'm connected to an Asterisk server that is pretending to be the telco.
Here's the corresponding openzap.conf.xml:
<configuration name="openzap.conf" description="OpenZAP Configuration"> <settings> <param name="debug" value="1"/> </settings>
<analog_spans> <span id="1"> <param name="dialplan" value="XML"/> <param name="context" value="default"/> </span> <span id="2"> <param name="dialplan" value="XML"/> <param name="context" value="default"/> </span> </analog_spans>
<pri_spans> <span id="3"> <param name="mode" value="user"/> <param name="dialect" value="DMS"/> <param name="dialplan" value="XML"/> <param name="context" value="default"/> </span> <span id="4"> <param name="mode" value="user"/> <param name="dialect" value="DMS"/> <param name="dialplan" value="XML"/> <param name="context" value="default"/> </span> </pri_spans> </configuration>
Again note span 3, which is a working PRI.
The trouble is, I don't believe that Mike has gotten to NI-2 just yet. I know DMS100 works if that is an option. I haven't tested 4ess/5ess yet either. Sorry!
At the very least you could use a setup like mine and get connected. Your D-channel will probably complain, but if they complain then at least you know your cards are installed and working.
Again, let us know how it goes...
-MC
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch- users-bounces@lists.freeswitch.org] On Behalf Of John Bittner Sent: Wednesday, November 07, 2007 6:51 PM To: Michael Collins Subject: Re: [Freeswitch-users] Openzap
Thanks Michael, That worked but now I have errors trying to get openzap to see the card. Do know were to get a openzap.conf sample config for a A104D card with 1 T1 Pri running NI2. I cant find any samples for wanpipe... only zap.
John B
-----Original Message----- John,
Do you have /etc/openzap/zt.conf?
I think you need all these in /etc/openzap: zt.conf openzap.conf wanpipe.conf
Check that and let us now... -MC
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch- users-bounces@lists.freeswitch.org] On Behalf Of John Bittner Sent: Wednesday, November 07, 2007 5:30 PM To: freeswitch-users@lists.freeswitch.org Subject: [Freeswitch-users] Openzap
Hey Guys, Am I missing something ? I got openzap to compile. I have a sangoma T1 card installed with wanpipe. I have the card configured, and I have wanpipe.conf file in the /usr/local/freeswitch/conf directory. Still I am getting this error when I try to load the module.
2007-11-07 15:25:21 [ERR] zap_io.c:1868 process_module_config() Cannot open wanpipe.conf 2007-11-07 15:25:21 [ERR] zap_io.c:1868 process_module_config() Cannot open zt.conf 2007-11-07 15:25:21 [ERR] zap_io.c:1926 zap_global_init() No modules configured! 2007-11-07 15:25:21 [ERR] mod_openzap.c:1201 mod_openzap_load() Error loading OpenZAP
If there a special place I need to put the wanpipe.conf file?
Any help is appreciated.
Thanks
John Bittner Simlab.net
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
--
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
--
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- BEGIN-ANTISPAM-VOTING-LINKS ------------------------------------------------------
Teach CanIt if this mail (ID 10787331) is spam: Spam: https://mx1.simlab.net/b.php? i=10787331&m=fefbb9b7991c&c=s Not spam: https://mx1.simlab.net/b.php? i=10787331&m=fefbb9b7991c&c=n Forget vote: https://mx1.simlab.net/b.php? i=10787331&m=fefbb9b7991c&c=f ------------------------------------------------------ END-ANTISPAM-VOTING-LINKS
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org