On Mon, May 9, 2011 at 12:45 PM, Marc de Corny <marcdecorny@gmail.com> wrote:
1. Is it possible to export variables from the A-leg of the queue to the B-let of the queue? There are the export and import commands, but not sure if they are applicable. If I capture calls coming out of the queue with a loopback I could then act using the variables that have been set from the A-leg.
I don't know why it wouldn't be applicable, export_vars would work whenever there is a bridge. Also, are you sure you would need to use a loopback? What about transfer_after_bridge? http://wiki.freeswitch.org/wiki/Variable_transfer_after_bridge Seems like it might be cleaner.
2. I'd like to send the call to the Freeswitch to play IVRs etc and then bridge it without the audio. I know it can be done on a normal bridge with bypass_media_after_bridge, but not so sure on a fifo call.
I haven't used the fifo in a while, but again, I think it's just a tool that eventually ends up with 2 channels being bridged. Good luck and let us know what you find. Best, Gabe