Actually DOWN simply means idle. Go ahead and make some calls - your config looks okay. -MC On Dec 31, 2009, at 12:45 AM, "Joseph L. Casale" <jcasale@activenetwerx.com
wrote:
I am trying to setup a TDM410P card nuder freeswitch-1.0.5-20091230-0400 and fs is reporting it as down?
/etc/dahdi/system.conf as it was under Asterisk, so its correct (set to fxs). /opt/freeswitch/conf/zt.conf is default.
# cat /opt/freeswitch/conf/openzap.conf [span zt] name => OpenZAP number => 1 fxo-channel => 1
# cat /opt/freeswitch/conf/autoload_configs/openzap.conf.xml <configuration name="openzap.conf" description="OpenZAP Configuration"> <settings> <param name="debug" value="0"/> <param name="hold-music" value="$${moh_uri}"/> <param name="enable-analog-option" value="call-swap"/> <param name="enable-analog-option" value="3-way"/> </settings> <!-- one entry here per openzap span --> <analog_spans> <span id="1"> <param name="tonegroup" value="us"/> <param name="digit-timeout" value="2000"/> <param name="max-digits" value="11"/> <param name="dialplan" value="XML"/> <param name="context" value="default"/> <param name="enable-callerid" value="true"/> </span> </analog_spans> </configuration>
# dahdi_scan [1] active=yes alarms=OK description=Wildcard TDM410P Board 1 name=WCTDM/0 manufacturer=Digium devicetype=Wildcard TDM410P location=PCI Bus 10 Slot 02 basechan=1 totchans=4 irq=233 type=analog port=1,FXO port=2,none port=3,none port=4,none
Yet fs_cli reports:
freeswitch@127.0.0.1@internal> oz list +OK span: 1 (span1) type: analog chan_count: 1 dialplan: XML context: default dial_regex: fail_dial_regex: hold_music: analog_options 3way
freeswitch@127.0.0.1@internal> oz dump 1 1 span_id: 1 chan_id: 1 physical_span_id: 1 physical_chan_id: 1 type: FXO state: DOWN last_state: DOWN cid_date: cid_name: cid_num: ani: aniII: dnis: rdnis: cause: NONE
Any idea what I am missing? The udev rules are set to the user/group fs runs under. Starting fs at the cli shows the following output, which looks fine?
2009-12-31 01:39:17.592736 [DEBUG] zap_config.c:56 Configuration file is /opt/freeswitch/conf/openzap.conf. 2009-12-31 01:39:17.592803 [DEBUG] zap_io.c:2362 found config for span 2009-12-31 01:39:17.593066 [NOTICE] ozmod_zt.c:1166 Using DAHDI control device 2009-12-31 01:39:17.593112 [INFO] zap_io.c:2579 Loading IO from /opt/ freeswitch/mod/ozmod_zt.so [zt] 2009-12-31 01:39:17.593145 [DEBUG] zap_config.c:56 Configuration file is /opt/freeswitch/conf/zt.conf. 2009-12-31 01:39:17.593258 [INFO] ozmod_zt.c:556 Setting rxgain val to 0.000000 2009-12-31 01:39:17.593298 [INFO] ozmod_zt.c:565 Setting txgain val to 0.000000 2009-12-31 01:39:17.593353 [INFO] zap_io.c:2379 auto-loaded 'zt' 2009-12-31 01:39:17.593399 [DEBUG] zap_io.c:2400 created span 1 (span1) of type zt 2009-12-31 01:39:17.593426 [DEBUG] zap_io.c:2413 span 1 [name]= [OpenZAP] 2009-12-31 01:39:17.593457 [DEBUG] zap_io.c:2413 span 1 [number]=[1] 2009-12-31 01:39:17.593485 [DEBUG] zap_io.c:2413 span 1 [fxo-channel] =[1] 2009-12-31 01:39:17.593513 [DEBUG] zap_io.c:2442 setting trunk type to 'FXO' start(KEWL) 2009-12-31 01:39:17.593593 [INFO] ozmod_zt.c:385 configuring device / dev/dahdi/channel channel 1 as OpenZAP device 1:1 fd:35 2009-12-31 01:39:17.593657 [INFO] zap_io.c:2502 Configured 1 channel (s)
although stopping fs yielded this:
2009-12-31 01:42:44.545768 [INFO] zap_io.c:269 Closing channel zt: 1:1 fd:35 2009-12-31 01:42:44.574577 [ERR] ozmod_analog.c:953 Failure Polling event! [no matching descriptor] 2009-12-31 01:42:45.546544 [INFO] zap_io.c:2694 Unloading /opt/ freeswitch/mod/ozmod_analog.so 2009-12-31 01:42:45.546735 [INFO] zap_io.c:2679 Unloading IO zt 2009-12-31 01:42:45.546756 [INFO] zap_io.c:2694 Unloading /opt/ freeswitch/mod/ozmod_zt.so
Thanks! jlc
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch- users http://www.freeswitch.org