Hi, from http://wiki.freeswitch.org/wiki/Enterprise_deployment_IP_Failover#Sofia_Prof... there you have: 'Also, you'll have to specify the SIP, RTP bind IP etc to be the floating IP, rather than the machine's auto-detected IP. rtp-ip, sip-ip, presence-hosts, ext-rtp-ip, ext-sip-ip' So. change the above params in your internal profile and the bonding IP should work. VG, Benjamin T. -----Ursprüngliche Nachricht----- Von: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] Im Auftrag von Sharad Garg Gesendet: Dienstag, 17. April 2012 12:23 An: freeswitch-users@lists.freeswitch.org Betreff: [Freeswitch-users] Freeswitch and network bonding Hi All I am trying to run the Freeswitch with network bonding. My scanerio is - eth0 - 192.168.4.25 eth1 - 192.168.4.30 bond0 - 192.168.4.65 This is the virtual IP which is to access the freeswitch. The issue is when I make a call to 192.168.4.65 which is a virtual ip of Freeswitch system, this call dies not reach at Freeswitch. When I do wireshark, wireshark shows `Destination unreachable'. The same freeswitch works well if I disable the network bonding. Here I would like to mention that I have not made any kind of settings in Freeswitch to run with network bonding. Can someone help me why call is not arriving at Freeswitch when network bonding is enabled. Thanks in advance. Best Regards Sharad