hello:I made a test with Asterisk, wanpipe and dahdi. the both of outgoing and incoming calls worked. Only the problem is existing by using freeTDM and FreeSWITCH. Under freeTDMand FreeSWITCH, we can not make outing calls. the system logs show:2013-08-02 14:36:42.003531 [NOTICE] mod_freetdm.c:2273 Hangup FreeTDM/2:1/13811737925 [CS_CONSUME_MEDIA] [NORMAL_CIRCUIT_CONGESTION]freeswitch@internal> -------------------------------------------------------I think it should be a bug with freeTDM. Best regards, James.zhu website: www.hiastar.com From: zhulizhong@live.com To: freeswitch-users@lists.freeswitch.org Date: Wed, 7 Aug 2013 01:52:15 +0000 Subject: Re: [Freeswitch-users] Can not make out going call from sangoma A200 thanks for the support. this is log:013-08-02 14:36:36.943647 [DEBUG] switch_core_state_machine.c:471 (sofia/internal/1008@192.168.0.173) State ROUTING going to sleepfreeswitch@internal> 2013-08-02 14:36:36.943647 [DEBUG] switch_core_state_machine.c:416 (sofia/internal/1008@192.168.0.173) Running State Change CS_EXECUTEfreeswitch@internal> 2013-08-02 14:36:36.943647 [DEBUG] switch_core_state_machine.c:478 (sofia/internal/1008@192.168.0.173) State EXECUTEfreeswitch@internal> 2013-08-02 14:36:36.943647 [DEBUG] mod_sofia.c:230 sofia/internal/1008@192.168.0.173 SOFIA EXECUTEfreeswitch@internal> 2013-08-02 14:36:36.943647 [DEBUG] switch_core_state_machine.c:209 sofia/internal/1008@192.168.0.173 Standard EXECUTEfreeswitch@internal> EXECUTE sofia/internal/1008@192.168.0.173 set(open=true)freeswitch@internal> 2013-08-02 14:36:36.943647 [DEBUG] mod_dptools.c:1393 sofia/internal/1008@192.168.0.173 SET [open]=[true]freeswitch@internal> EXECUTE sofia/internal/1008@192.168.0.173 bridge(freetdm/2/1/13811737925)freeswitch@internal> 2013-08-02 14:36:36.943647 [DEBUG] switch_ivr_originate.c:2060 Parsing global variablesfreeswitch@internal> 2013-08-02 14:36:36.943647 [DEBUG] mod_freetdm.c:403 Set codec PCMA 20msfreeswitch@internal> 2013-08-02 14:36:36.943647 [DEBUG] mod_freetdm.c:1242 Connect outbound channel FreeTDM/2:1/13811737925freeswitch@internal> 2013-08-02 14:36:36.943647 [NOTICE] switch_channel.c:1030 New Channel FreeTDM/2:1/13811737925 [db274fb7-a395-4f29-8ff1-5a6634f01c56]freeswitch@internal> 2013-08-02 14:36:36.943647 [DEBUG] mod_freetdm.c:1251 (FreeTDM/2:1/13811737925) State Change CS_NEW -> CS_INITfreeswitch@internal> 2013-08-02 14:36:36.943647 [DEBUG] switch_core_session.c:1341 Send signal FreeTDM/2:1/13811737925 [BREAK]freeswitch@internal> 2013-08-02 14:36:36.943647 [DEBUG] mod_freetdm.c:1270 Attached session db274fb7-a395-4f29-8ff1-5a6634f01c56 to channel 2:1freeswitch@internal> 2013-08-02 14:36:36.943647 [DEBUG] ftmod_analog.c:62 [s2c1][1:3] Changed state from DOWN to DIALINGfreeswitch@internal> 2013-08-02 14:36:36.943647 [DEBUG] ftmod_analog.c:437 [s2c1][1:3] ANALOG CHANNEL thread starting.freeswitch@internal> 2013-08-02 14:36:36.943647 [DEBUG] ftdm_io.c:3381 [s2c1][1:3] Enabled software DTMF detectorfreeswitch@internal> 2013-08-02 14:36:36.943647 [DEBUG] ftmod_analog.c:457 [s2c1][1:3] Initialized DTMF detectionfreeswitch@internal> 2013-08-02 14:36:36.943647 [DEBUG] ftmod_analog.c:638 [s2c1][1:3] Completed state change from DOWN to DIALING in 1 msfreeswitch@internal> 2013-08-02 14:36:36.943647 [DEBUG] ftmod_analog.c:644 [s2c1][1:3] Executing state handler on 2:1 for DIALINGfreeswitch@internal> 2013-08-02 14:36:36.963647 [DEBUG] ftmod_wanpipe.c:1002 [s2c1][1:3] First packet read stats: Rx queue len: 0, Rx queue size: 10freeswitch@internal> 2013-08-02 14:36:37.443634 [DEBUG] switch_core_state_machine.c:416 (FreeTDM/2:1/13811737925) Running State Change CS_INITfreeswitch@internal> 2013-08-02 14:36:37.443634 [DEBUG] switch_core_state_machine.c:455 (FreeTDM/2:1/13811737925) State INITfreeswitch@internal> 2013-08-02 14:36:37.443634 [DEBUG] mod_freetdm.c:430 (FreeTDM/2:1/13811737925) State Change CS_INIT -> CS_ROUTINGfreeswitch@internal> 2013-08-02 14:36:37.443634 [DEBUG] switch_core_session.c:1341 Send signal FreeTDM/2:1/13811737925 [BREAK]freeswitch@internal> 2013-08-02 14:36:37.443634 [DEBUG] switch_core_state_machine.c:455 (FreeTDM/2:1/13811737925) State INIT going to sleepfreeswitch@internal> 2013-08-02 14:36:37.443634 [DEBUG] switch_core_state_machine.c:416 (FreeTDM/2:1/13811737925) Running State Change CS_ROUTINGfreeswitch@internal> 2013-08-02 14:36:37.443634 [DEBUG] switch_core_state_machine.c:471 (FreeTDM/2:1/13811737925) State ROUTINGfreeswitch@internal> 2013-08-02 14:36:37.443634 [DEBUG] mod_freetdm.c:453 FreeTDM/2:1/13811737925 CHANNEL ROUTINGfreeswitch@internal> 2013-08-02 14:36:37.443634 [DEBUG] switch_ivr_originate.c:67 (FreeTDM/2:1/13811737925) State Change CS_ROUTING -> CS_CONSUME_MEDIAfreeswitch@internal> 2013-08-02 14:36:37.443634 [DEBUG] switch_core_session.c:1341 Send signal FreeTDM/2:1/13811737925 [BREAK]freeswitch@internal> 2013-08-02 14:36:37.443634 [DEBUG] switch_core_state_machine.c:471 (FreeTDM/2:1/13811737925) State ROUTING going to sleepfreeswitch@internal> 2013-08-02 14:36:37.443634 [DEBUG] switch_core_state_machine.c:416 (FreeTDM/2:1/13811737925) Running State Change CS_CONSUME_MEDIAfreeswitch@internal> 2013-08-02 14:36:37.443634 [DEBUG] switch_core_state_machine.c:490 (FreeTDM/2:1/13811737925) State CONSUME_MEDIAfreeswitch@internal> 2013-08-02 14:36:37.443634 [DEBUG] switch_core_state_machine.c:490 (FreeTDM/2:1/13811737925) State CONSUME_MEDIA going to sleepfreeswitch@internal> 2013-08-02 14:36:41.963531 [DEBUG] ftmod_analog.c:503 [s2c1][1:3] Changed state from DIALING to BUSYfreeswitch@internal> 2013-08-02 14:36:41.983901 [DEBUG] ftmod_analog.c:638 [s2c1][1:3] Completed state change from DIALING to BUSY in 20 msfreeswitch@internal> 2013-08-02 14:36:41.983901 [DEBUG] ftmod_analog.c:644 [s2c1][1:3] Executing state handler on 2:1 for BUSYfreeswitch@internal> 2013-08-02 14:36:41.983901 [DEBUG] ftmod_analog.c:803 [s2c1][1:3] Changed state from BUSY to DOWNfreeswitch@internal> 2013-08-02 14:36:42.003531 [DEBUG] ftmod_analog.c:638 [s2c1][1:3] Completed state change from BUSY to DOWN in 20 msfreeswitch@internal> 2013-08-02 14:36:42.003531 [DEBUG] ftmod_analog.c:644 [s2c1][1:3] Executing state handler on 2:1 for DOWNfreeswitch@internal> 2013-08-02 14:36:42.003531 [DEBUG] mod_freetdm.c:2253 got FXO sig 2:1 [STOP]freeswitch@internal> 2013-08-02 14:36:42.003531 [NOTICE] mod_freetdm.c:2273 Hangup FreeTDM/2:1/13811737925 [CS_CONSUME_MEDIA] [NORMAL_CIRCUIT_CONGESTION]freeswitch@internal> 2013-08-02 14:36:42.003531 [DEBUG] switch_channel.c:3135 Send signal FreeTDM/2:1/13811737925 [KILL]freeswitch@internal> 2013-08-02 14:36:42.003531 [DEBUG] switch_core_session.c:1341 Send signal FreeTDM/2:1/13811737925 [BREAK]freeswitch@internal> freeswitch@internal> -----------------------------------------------------------------------the port is working for inbound calls. Best regards, James.zhu website: www.hiastar.com From: zhulizhong@live.com To: freeswitch-users@lists.freeswitch.org Date: Tue, 6 Aug 2013 06:42:14 +0000 Subject: Re: [Freeswitch-users] Can not make out going call from sangoma A200 hello:I contacted Sangoma, but I do not have any feedback yet. I think it might be a bugfor analog card with freeSWITCH. freetdm partially works with sangoma A200. There are two issues:1) Can not get callerid from IO: only shows this:Initializing cid data! the callerid is emptyeven I set to CN.2) Can not make outgoing calls by the port that I used to make outgoing calls. even I replaced a FXO module, the problem is same. I use same syntax as follow:http://blog.hiastar.com/?p=276 Hope someone from the FreeSWITCH community to clarify that. Best regards, James.zhu website: www.hiastar.com Date: Fri, 2 Aug 2013 23:03:47 -0400 From: bdfoster@davri.com To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Can not make out going call from sangoma A200 I apologize, I misread your email. Hopefully someone who knows FreeTDM will come around. Have you contacted Sangoma? They are the maintainers of FreeTDM as far as I know. You might try that route. They are very familiar with freeswitch im sure :). Thank you, Brian Foster Project Manager/Owner's Rep. Davri Investments, Inc. O: 317-787-2686 x2102 M: 317-600-9753 E: bdfoster@davri.com Indianapolis, Indiana Sent from a mobile device. On Aug 2, 2013 10:39 PM, "James zhu" <zhulizhong@live.com> wrote: thanks, Brian. actually the 2:1 is idle because the port can accept incoming call. afterI reload freetdm or restart FS, I still can not make outgoing calls. If the port physicallyfailed, how come I can make incoming call use the same port. confused. thanks again. Best regards, James.zhu website: www.hiastar.com Date: Fri, 2 Aug 2013 14:22:29 -0400 From: bdfoster@davri.com To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Can not make out going call from sangoma A200 That's the expected behavior if 2:1 is in use. So that means you use another port to place your outbound call. Tips on how to do that, however, I can't really produce. Hopefully someone with more experience with FreeTDM can chime in. Thank you, Brian Foster Project Manager/Owner's Rep. Davri Investments, Inc. O: 317-787-2686 x2102 M: 317-600-9753 E: bdfoster@davri.com Indianapolis, Indiana Sent from a mobile device. On Aug 2, 2013 3:09 AM, "James zhu" <zhulizhong@live.com> wrote: hello:I installed freeswitch and sangoma A200 with 2 FXOs. i set the tone group to CNand opermode=china. the A200 can make accept incoming calls from FreeTDM/2:1 , but I use same port to make out going port, the shows the port is CONGESTION. --------------------------system log-----------------------------------------------2013-08-02 14:36:42.003531 [DEBUG] mod_freetdm.c:640 [2:1] FreeTDM/2:1/13811737925 CHANNEL HANGUP EXIT 2013-08-02 14:36:42.003531 [DEBUG] switch_core_state_machine.c:48 FreeTDM/2:1/13811737925 Standard HANGUP, cause: NORMAL_CIRCUIT_CONGESTION2013-08-02 14:36:42.003531 [DEBUG] switch_core_state_machine.c:679 (FreeTDM/2:1/13811737925) State HANGUP going to sleep 2013-08-02 14:36:42.003531 [DEBUG] switch_core_state_machine.c:692 (FreeTDM/2:1/13811737925) Callstate Change DOWN -> HANGUP2013-08-02 14:36:42.003531 [DEBUG] switch_core_state_machine.c:447 (FreeTDM/2:1/13811737925) State Change CS_HANGUP -> CS_REPORTING 2013-08-02 14:36:42.003531 [DEBUG] switch_core_session.c:1341 Send signal FreeTDM/2:1/13811737925 [BREAK]2013-08-02 14:36:42.003531 [DEBUG] switch_core_state_machine.c:416 (FreeTDM/2:1/13811737925) Running State Change CS_REPORTING 2013-08-02 14:36:42.003531 [DEBUG] switch_core_state_machine.c:764 (FreeTDM/2:1/13811737925) State REPORTING2013-08-02 14:36:42.003531 [DEBUG] switch_core_state_machine.c:92 FreeTDM/2:1/13811737925 Standard REPORTING, cause: NORMAL_CIRCUIT_CONGESTION 2013-08-02 14:36:42.003531 [DEBUG] switch_core_state_machine.c:764 (FreeTDM/2:1/13811737925) State REPORTING going to sleep2013-08-02 14:36:42.003531 [DEBUG] switch_core_state_machine.c:441 (FreeTDM/2:1/13811737925) State Change CS_REPORTING -> CS_DESTROY 2013-08-02 14:36:42.003531 [DEBUG] switch_core_session.c:1341 Send signal FreeTDM/2:1/13811737925 [BREAK]2013-08-02 14:36:42.003531 [DEBUG] switch_core_session.c:1549 Session 37 (FreeTDM/2:1/13811737925) Locked, Waiting on external entities 2013-08-02 14:36:42.023531 [DEBUG] switch_ivr_originate.c:3632 Originate Resulted in Error Cause: 34 [NORMAL_CIRCUIT_CONGESTION]2013-08-02 14:36:42.023531 [INFO] mod_dptools.c:3192 Originate Failed. Cause: NORMAL_CIRCUIT_CONGESTION 2013-08-02 14:36:42.023531 [NOTICE] switch_channel.c:4593 Hangup sofia/internal/1008@192.168.0.173 [CS_EXECUTE] [NORMAL_CIRCUIT_CONGESTION]2013-08-02 14:36:42.023531 [DEBUG] switch_channel.c:3135 Send signal sofia/internal/1008@192.168.0.173 [KILL] 2013-08-02 14:36:42.023531 [DEBUG] switch_core_session.c:1341 Send signal sofia/internal---------------------------------------------the FS is download from git and wanpipe is latest version. please give a help for that issue. Best regards, James.zhu website: www.hiastar.com _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org