Here is the thread I post before ... http://lists.freeswitch.org/pipermail/freeswitch-users/2010-April/055696.htm... All sort of problem from Tomato. Also I can share you the experience. 1. If you unplug the power and restart the router . Phones never connect the server. 2. If you reboot from web interface . Then all phones start to work. 3. Etc ..... Here is another link http://www.dslreports.com/forum/r23423987-Equipment-Tomato-with-VOIP-warning Google : Tomato + SIP issues I am using dd-wrt for last four months never have any problem.FreeSWITCH default configuration working all the time. That is my experience. Hope this may help you. Thanks and regards, Loyd On Mon, Jan 10, 2011 at 4:46 PM, Aloysius Lloyd <lloyd.aloysius@gmail.com>wrote:
Brian,
Yes that correct. Sometimes Tomato suddenly send wrong messages to the sip server ... that causes authentication fails. We suspect the password strip off some characters. This is happen suddenly and after some time it will work back normal.
I try with 1.25 , 1.27 and 1.28 ..... no luck then I switch to dd-wrt all problems go away. I am using Firmware: DD-WRT v24-sp2 (08/07/10) voip
what is the Tomato firmware u r using?
Thanks Lloyd
On Mon, Jan 10, 2011 at 4:37 PM, Alex Wang <hadyn_whx@hotmail.com> wrote:
I had bad experience about dd-wrt, not stable on my router, always cause the problem or hang up over night. I will try the nat-pmp on tomato. Switch back to dd-wrt will be my last option.
BTW, how to disable extension register from external after I turn the upnp up? All the extensions are in my LAN and I do see some ip trying to register the extension from outside.
Thanks
Alex
On Mon, 10 Jan 2011 15:39:51 -0500 Aloysius Lloyd <lloyd.aloysius@gmail.com> wrote:
Alex,
There are some bugs in Tomato Firmware. Sometimes work and some times suddenly it strip some sip messages. Sometime no passwords. I find very difficult on this.
Switch to some other firmware ... DD-WRT. your problem go away and you do not need to do any changes on the router firmware configuration and FreeSWITCH.
I have this problem for a longtime finally figure out with the debug. Then I use the DD-WRT for Linksys WRT54GL the voip firmware version problem go away.
Hope this helps.
Thanks Lloyd
On Mon, Jan 10, 2011 at 3:21 PM, Alex Wang <hadyn_whx@hotmail.com> wrote:
Thanks Brian
Alex
On Mon, 10 Jan 2011 13:24:27 -0600 Brian West <brian@freeswitch.org> wrote:
use nat-pmp upnp is unreliable sometimes.
/b
On Jan 10, 2011, at 12:55 PM, Alex Wang wrote:
Thanks Rupa
Tomato 1.28 enable uPNP. Sometime works sometime not. I am doing more test. I also see outside connection trying to register extension after I turn on the uPNP, I know the uPNP also map the port out. How to disable that?
Thanks
Alex
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org