Just configure codec preferences appropriately. We filter prefs based on whats loaded so that would be why you wouldnt see it until module is loaded.
On Jun 19, 2018, at 2:40 PM, Magnus <magnus.kelly@gmail.com> wrote:
Chad, good addition to documents, by chance have you also discovered how to enable mod_av, but not use H264? I ask as I observe that enabling mod_av adds the h264 codec even if it’s not listed in vars.xml. In my particular case I would like to use mod_av but select when to use h.264 by destination as opposed to it being included in every sip sdp, but I have not yet worked out how to do so - by chance have you any tips from your testing ?
Regards Magnus
On 19 Jun 2018, at 17:34, Michael Jerris <mike@jerris.com <mailto:mike@jerris.com>> wrote:
Awesome. No problem.
On Jun 19, 2018, at 11:04 AM, Chad Phillips <chad@apartmentlines.com <mailto:chad@apartmentlines.com>> wrote:
Yep, that was it, thanks!
I added a section to the Verto docs to clarify all the steps to get H264 working: https://evoluxbr.github.io/verto-docs/tut/adding-h264-support.html <https://evoluxbr.github.io/verto-docs/tut/adding-h264-support.html> On Mon, Jun 18, 2018 at 4:21 PM Michael Jerris <mike@jerris.com <mailto:mike@jerris.com>> wrote: load mod_av? if thats not the issue, I’d need to see a debug log w/ sip trace to tell you more.
On Jun 15, 2018, at 2:50 PM, Chad Phillips <chad@apartmentlines.com <mailto:chad@apartmentlines.com>> wrote:
I have a slightly older install where I’m using H264 with Verto, and it works fine. However, I’m not able to get it working on latest master.
I’m guessing there’s some esoteric setting I’m missing, but can’t seem to find it. I do have the following in verto.conf.xml:
<param name="outbound-codec-string" value="opus,h264"/> <param name=“inbound-codec-string” value="opus,h264"/>
I also have mod_h26x disabled, as I remember that’s passthrough only and causes issues when loaded in this case.
When I try in Chrome I see it offering H264 in the SDP, but the answer SDP contains this, and the stream is audio only:
m=video 0 UDP/TLS/RTP/SAVPF 19
What am I missing??