Dear friends, I've installed freeswitch trunk - 16729 and tried to configure with wanpipe for sangoma A102 pri card. Followed the steps given in http://wiki.sangoma.com/wanpipe-freeswitch-install When loading the freeswitch, I've got the following error. 2010-02-23 14:49:58.545726 [INFO] ozmod_wanpipe.c:335 configuring device s2c15 as OpenZAP device 1:30 fd:57 DTMF: software 2010-02-23 14:49:58.546004 [ERR] ozmod_wanpipe.c:436 No valid wanpipe span and channel was specified 2010-02-23 14:49:58.546275 [INFO] zap_io.c:2500 Configured 30 channel(s) 2010-02-23 14:49:58.560724 [ERR] zap_io.c:2560 Error loading /usr/local/freeswitch/mod/ozmod_sangoma_boost.so [/usr/local/freeswitch/mod/ozmod_sangoma_boost.so: cannot open shared object file: No such file or directory] 2010-02-23 14:49:58.561048 [ERR] zap_io.c:2720 can't find 'sangoma_boost' 2010-02-23 14:49:58.561266 [ERR] mod_openzap.c:2458 Error starting OpenZAP span 1 error: 2010-02-23 14:49:58.561712 [NOTICE] switch_loadable_module.c:144 Adding Endpoint 'openzap' Configuration and log files are pasted to pastebin. Kindly someone help me to solve this issue. openzap.conf and openzap.conf.xml http://pastebin.freeswitch.org/12214 freeswitch log http://pastebin.freeswitch.org/12216 smg_pri.conf http://pastebin.freeswitch.org/12217 -- Regards, Nagalenoj H.