What codec are you using? Have you turned down/off logging? Is there any swapping going on? Guillermo On Tue, Jun 24, 2014 at 4:42 PM, Guillermo Ruiz Camauer <grcamauer@gmail.com
wrote:
Have you tried spreading the calls over more than 1 SIP profile? Each SIP profile gets its own thread.
Also, is this all within your LAN? No firewalls/filters? Are you sure you are linking at 1Gbps, full duplex?
Guillermo
On Sat, Jun 7, 2014 at 2:22 PM, D D <tru083@yahoo.com> wrote:
Hi,
I would like to put 500 - 1000 calls into a FS system.
I have a Dell R900 server with these properties: 8 processors at 2.40GHz 8GB RAM Gigabit ethernet
I use sipp to send RTP streams.
I use the FS settings recommended here:
https://wiki.freeswitch.org/wiki/Performance_testing_and_configurations including the in-memory core.db.
I also have used the "-rp" and "-nosql" settings on the FS command-line, and also used the "chrt" command to increase the priority to real-time.
In all cases, at around 300 concurrent calls, the RTP inter-packet delay becomes unacceptably high. The voice quality is severely impacted.
During the test, the CPU is not overloaded. It is using only about 1.5 of the 8 processors.
Are these results expected?
Has anyone gone higher than 300 concurrent calls?
Is there anything else that I can do with configuration to improve throughput?
Thanks, David
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Guillermo Ruiz Camauer
-- Guillermo Ruiz Camauer