Hi, We're running into an issue with Cisco SPA50x phones where an intercom call to an extension either places the currently active call on hold or hangs up on it and switches to the intercom call. We'd like to not have this happen if the destination extension is in use. The only way I know of to do this would involve reconfiguring all of the phones to share presence and then check it in the dialplan before bridging. Is there a convenient "no-barge" variable or similar that can be set so FS won't send the invite if the extension is in use or a way to check the extension's state from the dialplan? I'm guessing that's a NO but I had to ask! Alternatively, is there a way to get the Cisco phones not to interrupt the call in progress when a call comes in? Instead of setting sip_auto_answer=true, I've also tried setting sip_h_Call-Info=<sip:ip.address.of.server>;answer-after=0 which appears to stop this behavior on the Aastra phones but not the Cisco phones, although I'm not entirely sure about this as I now can't seem to reproduce the undesired behavior on the Aastra phones... Dialplan entry for the intercom as it stands is as follows: <extension name="extension-intercom-fix" continue="true"> <condition field="destination_number" expression="^\*8(\d{2,7})$" > <action application="set" data="dialed_extension=$1" /> <action application="bridge" data="user/${dialed_extension}@${domain_name}" /> <action application="export" data="sip_auto_answer=true" /> </condition> </extension> Any thoughts or advice would be appreciated. Thanks! Phil Quesinberry Q Systems Engineering, Inc. Embedded Systems, Telecom, IT (410) 969-8002 http://www.qsystemsengineering.com <http://www.qsystemsengineering.com/>