Hello all, I have two Polycom Soundpoint IP 501 phones running firmware 3.1.x and registered to FreeSwitch. I have the phones set up with two lines each, one private and one shared. For instance: Phone1: ext 1006 (private) and ext 1009 (shared) Phone2: ext 1007 (private) and ext 1009 (shared) When I dial extension 1009, both phones ring as expected. When I pick up the call on one phone, the other phone shows the busy status of the line as expected. However, when I place the call on hold from either phone and attempt to "unhold" the call from the other phone, it attempts to dial the shared extension (1009) instead of bridging the call from the original calling phone (say ext 1005). This is the case when there are two callsPerLine setup in the <ext>-<MAC>.cfg file for each phone. When there is only 1 callsPerLine, attemtping to "unhold" the call will simply drop the call on that particular phone. I have the following configuration in conf/sip_profiles/internal.xml ... "/> ... I have the following configuration in conf/dialplan/default.xml for ext 1009 <extension name="1009"> <condition field="destination_number" expression="^(1009)$" > <action application="answer"/> <action application="bridge" data="{sip_invite_domain=<IP of my PBX>} dialuser/1009@${domain_name}"/> </condition> </extension> The following is my FreeSwitch version: FreeSWITCH Version 1.1.beta1 (git-4283408 2012-04-29 11-33-24 -0400) Any help is greatly appreciated! -- View this message in context: http://old.nabble.com/Polycom-SCA-SLA-Trouble-tp33858252p33858252.html Sent from the Freeswitch-users mailing list archive at Nabble.com.