Try anything after rev 8857 /b On Jun 26, 2008, at 8:23 PM, mayamatakeshi wrote:
Hello, I'm playing with FreeSwitch svn revision 8849. When I try to put an established call on hold (I'm using eyebeam), FreeSwitch takes 5 seconds to reply with 200 OK. This would not be a big problem by itself, but it seems this OnHold processing blocks the reply for all other incoming calls (or SIP calls at least). As an example, below are the timestamps of a call to 9998 from the time the INVITE ONHOLD was sent and of a new call to 9997 (which itself caused eyebeam to put 9998 on hold) till the reception of 200OK. You will see the 200 OK for the 9997 call will only happen after 200 OK for 9998 REINVITE for ONHOLD is transmmited (9998 and 9987 are the test numbers from default.xml dialplan. I copied them to public.xml so that I would not be bothered with authentication messages during this test):
09:52:40.6 SENDING TO: 192.168.128.3:5080 INVITE sip:mod_sofia@192.168.128.3:5080;transport=udp SIP/2.0 To: <sip:9998@freeswitch>;tag=ZpggZ9jgp01tj From: 1001 <sip:1001@freeswitch>;tag=5a0b7d40 a=sendonly
09:52:40.6 RECEIVING FROM: 192.168.128.3:5080 SIP/2.0 100 Trying From: 1001 <sip:1001@freeswitch>;tag=5a0b7d40 To: <sip:9998@freeswitch>;tag=ZpggZ9jgp01tj
09:52:41.4 SENDING TO: 192.168.128.3:5080 INVITE sip:9997@freeswitch SIP/2.0 To: <sip:9997@freeswitch> From: 1001<sip:1001@freeswitch>;tag=226ba00e a=sendrecv
09:52:41.5 RECEIVING FROM: 192.168.128.3:5080 SIP/2.0 100 Trying From: 1001 <sip:1001@freeswitch>;tag=226ba00e To: <sip:9997@freeswitch>
09:52:45.6 RECEIVING FROM: 192.168.128.3:5080 SIP/2.0 200 OK From: 1001 <sip:1001@freeswitch>;tag=5a0b7d40 To: <sip:9998@freeswitch>;tag=ZpggZ9jgp01tj a=sendrecv
09:52:45.6 SENDING TO: 192.168.128.3:5080 ACK sip:mod_sofia@192.168.128.3:5080;transport=udp SIP/2.0 To: <sip:9998@freeswitch>;tag=ZpggZ9jgp01tj From: 1001 <sip:1001@freeswitch>;tag=5a0b7d40
09:52:45.7 RECEIVING FROM: 192.168.128.3:5080 SIP/2.0 200 OK From: 1001 <sip:1001@freeswitch>;tag=226ba00e To: <sip:9997@freeswitch>;tag=0Z98043KK9QDe a=sendrecv
I also tried to initiate a call with another softphone (SIP Communicator) while eyebeam was putting its call on hold and the same thing happened. On the other hand INVITE OFFHOLD is replied instantly.
Regards, takeshi
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Brian West sip:brian@freeswitch.org