Are you planning to peer directly to Communication Manager or using Avaya Session Manager in between? It can be done both ways. If the requirement is to transact only with Communication Manager a direct connection may work out. In that case I'd suggest you'll need to add a node-name (which is like a host table entry) for FS and a signaling group of type SIP, along with a trunk group whose channels are controlled by said signaling group. Assume TCP signaling to begin with and pay attention to your port numbers. Some may already be used by other signaling groups. Codecs are assigned based on a network-region construct which is used to model your voip network against your physical topology, supporting call admission control and where DSP channels are sourced. Since Avaya doesn't use it's server host to mix audio, you'll have to know that the network region you choose either has DSPs or a logical path to a region which does is available. The network region is assigned to the SIP signaling group in a field called Far End Network region. To point calls at the trunk group you'll have to set up a route pattern and then place a dial string match in either an ARS analysis table (PSTN) or an AAR analysis table (private network). How are you thinking about using AES? I don't see an easy interface, but if you program TSAPI, it may be useful to get call events from the Avaya side. Tom Lynn On Fri, Dec 8, 2017 at 2:12 PM, Karanath sachidanandan, Sanooj < SANOOJ_KARANATH_SACHIDANANDAN@homedepot.com> wrote:
Hi All,
Is there any documentation on connecting FS to AVAYA CM/AES ? or any pointers ?
Regards
Sanooj
------------------------------
The information in this Internet Email is confidential and may be legally privileged. It is intended solely for the addressee. Access to this Email by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful. When addressed to our clients any opinions or advice contained in this Email are subject to the terms and conditions expressed in any applicable governing The Home Depot terms of business or client engagement letter. The Home Depot disclaims all responsibility and liability for the accuracy and content of this attachment and for any damages or losses arising from any inaccuracies, errors, viruses, e.g., worms, trojan horses, etc., or other items of a destructive nature, which may be contained in this attachment and shall not be liable for direct, indirect, consequential or special damages in connection with this e-mail message or its attachment.
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org