Hi Moises, Thank you. This is very helpful as it seems to detail the same problem. I tested with both OpenZap and FreeTDM yielding the same results. I think Anthony Minnessale is close when he writes: "Maybe there are some new ioctls or something they added for interop with OSLEC that we don't know about." Except that whatever changed in (the) DAHDI (API) seems to have broken all echo canceling (MG2 and OSLEC) somewhere between DAHDI and FreeTDM/OpenZap. Anthony also suggests: "If you still have the problem the next step would be to add some debugging code to the ozmod_zt read and write functions to see if it's sending data up to the app." I'm going to see if my C-fu is up to doing that. Anybody know where the debugging code should go for FreeTDM? Lastly, the only semi-relevant Google find I did was this [1]: "Make sure echotraining is disabled when using Oslec - this is not supported and if enabled will cause the channel to be silent (i.e. no audio will pass through)" In FreeTDM/OpenZap/FreeSwitch there doesn't seem to be an "echo training" knob to twiddle. Cheers, -Slim [1] http://www.rowetel.com/ucasterisk/oslec.html -- Jeroen C. "Slim" van Gelderen Olympic Sports Data Services Email: jeroeng@thegreek.com Phone: +1 876 953 6182 x128 ________________________________________ From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Moises Silva Sent: Monday, June 28, 2010 10:04 To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] FreeTDM and DAHDI+OSLEC/MG2 anyone? This may be of help: http://lists.freeswitch.org/pipermail/freeswitch-users/2010-March/055505.htm l Moises Silva Senior Software Engineer Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R 9T3 Canada t. 1 905 474 1990 x 128 | e. moy@sangoma.com On Sat, Jun 26, 2010 at 8:57 PM, Jeroen C. van Gelderen <jeroeng@thegreek.com> wrote: Hi everybody, I have a feeling I must be missing the obvious... I've been trying to get echo canceling to work with Freeswitch/FreeTDM/DAHDI but I have been failing miserably for days. When I enable echo cancellation (MG2 or OSLEC) on a DAHDI/FreeTDM channel (FXS or FXO) that channel goes silent. In absence of better suggestions I was hoping to replicate someone's "known working" configuration. Is anyone successfully running the following combination: - any x86 hardware - any recent flavor Linux - any recent version of DAHDI using FXO ports - FreeSwitch/FreeTDM trunk from git - OSLEC echo canceller (or MG2) - (BONUS:) Xorcom Astribank with FXO/FXS ports. I addition to much Googling I've tried most permutations of: - CentOS 5.4, 5.5, Ubuntu 10.04 LTS, Elastix - x86 and x64 single and multicore CPUs. - Non-PAE kernels for 32-bit installs. - DADHI from SVN (or -in case of Elastix- the built-in 2.2.0.2) - MG2 and OSLEC echo cancellers - Freeswitch from Git trunk In each case everything configures fine to the point that Asterisk 1.6 will function with echo cancellation enabled. So we know that DAHDI layer works. But Freeswitch channels go silent when echo cancellation is enabled. Puzzled, -Slim -- Jeroen C. "Slim" van Gelderen _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org