I am having a problem where in inbound call from the PSTN going to the demo IVR does not recognize DTMF digits. I posted a log at http://pastebin.freeswitch.org/11769. I am running Freeswitch (freeswitch-1.0.5-20100112-0400.tar.gz) with an A101D Sangoma Card and wanpipe driver: wanpipe-3.5.10.tgz. I am not using libpri. It appears that each DTMF digit might be getting detected twice. I tried to dial "5401" and it thought I dialed "5544". I am following the instructions at http://wiki.freeswitch.org/wiki/Misc._Dialplan_Tools_start_dtmf, as shown below. Also, I tried moving the "start_dtmf" statement in between all the statements within the condition tag, but it didn't make any difference. <extension name="ivr_demo"> <condition field="destination_number" expression="5000"> <action application="answer"/> <action application="start_dtmf" /> <action application="sleep" data="2000"/> <action application="ivr" data="demo_ivr"/> </condition> </extension> Also, I noticed at line #293, the log is saying: [ERR] mod_sndfile.c:194 Error Opening File [/usr/local/freeswitch/sounds/ivr/ivr-that_was_an_invalid_entry.wav] [System error : No such file or directory.] Has anyone else encountered this issue? Best Regards, Jerry