Dear Tihomir, Any update and help on the below please. Abid From: abid_freeswitch@live.com To: tculjaga@gmail.com CC: neal@wanlink.com Subject: Re: [Freeswitch-users] Radius/Authentication/Authorization Date: Wed, 31 Mar 2010 19:35:32 +0500 Dear Tihomir, Thank you very much for the configuration example but in which files to place these configurations. Please bear with me because I am new to FreeSwitch and if you could provide complete steps. Also when I compile FS and load the module mod_rad_auth in conf/autoload_configs/modules.conf.xml, I get an error while starting FS as follows. 2010-03-31 19:32:29.399466 [CRIT] switch_loadable_module.c:882 Error Loading module /usr/local/freeswitch/mod/mod_rad_auth.so**/usr/local/freeswitch/mod/mod_rad_auth.so: undefined symbol: rc_conf_str** Please advise. Thanks. Regards-----------Abid Saleem --Forwarded Message Attachment-- From: tculjaga@gmail.com CC: neal@wanlink.com To: freeswitch-users@lists.freeswitch.org Date: Tue, 30 Mar 2010 21:42:03 +0200 Subject: Re: [Freeswitch-users] Radius/Authentication/Authorization hello, here is an example <configuration name="rad_auth.conf" description="radius authentification module"> <settings> <!-- backward compatibility to allow radiusclient config file instead of an embedded config --> <!-- <param name="radius_config" value="/usr/local/etc/radiusclient/radiusclient.conf"/> --> </settings> <client> <param name="authserver" value="10.1.1.10:1812:gateway"/> <param name="dictionary" value="/usr/local/etc/radiusclient/dictionary.all"/> <param name="seqfile" value="/var/run/radius.seq"/> <param name="mapfile" value="/usr/local/etc/radiusclient/port-id-map"/> <param name="default_realm" value=""/> <param name="radius_timeout" value="3"/> <param name="radius_retries" value="2"/> <param name="radius_deadtime" value="0"/> <param name="bindaddr" value="*"/> </client> <vsas> <!-- name: just a description value: direct input or variable pec: vendor ID (0 for default, 9 for cisco...) expr: 1 for channel variable, 2 for direct input direction: in for radius-request, out for radius-response --> <!-- mappings for radius request message; input attributes --> <param name="h323-conf-id" id="24" value="CALLID" pec="9" expr="1" direction="in"/> <param name="h323-prompt-id" id="104" value="SERVICENUM" pec="9" expr="1" direction="in"/> <param name="Cisco-AVPair" id="1" value="TRANSACTIONID" pec="9" expr="1" direction="in"/> <param name="Calling-Station-Id" id="31" value="CALLINGNUMBER" pec="0" expr="1" direction="in"/> <param name="NAS-Port-Type" id="61" value="0" pec="0" expr="0" direction="in"/> <param name="NAS-Port-Id" id="87" value="ISDN 3/0:D:14" pec="0" expr="0" direction="in"/> <param name="Login-User" id="1" value="1" pec="0" expr="0" direction="in"/> <!-- mappings for radius-response message; output values from returning outributes --> <param name="BILING_MODEL" id="109" value="billing_model" pec="9" expr="0" direction="out"/> <param name="CREDIT_AMOUNT" id="101" value="credit_amount" pec="9" expr="0" direction="out"/> <param name="CURRENCY" id="110" value="currency" pec="9" expr="0" direction="out"/> <param name="PREFFERED_LANG" id="107" value="preffered_lang" pec="9" expr="0" direction="out"/> <param name="CREDIT_TIME" id="102" value="credit_time" pec="9" expr="0" direction="out"/> <param name="H323-IVR-IN:DIRATION" id="1" value="h323_ivr_duration" pec="9" expr="0" direction="out"/> <param name="RADIUS_RETURN_CODE" id="103" value="return_code" pec="9" expr="0" direction="out"/> <!-- expr param is to be ignored here--> </vsas> </configuration> in the dialplan you need to trigger auth as: <action application="auth_function" data="in ${DIALED_NUMBER}, in ${USERNAME}, in ${PASSWD}, out AUTH_RESULT"/> there are two behaviours: 1. authorize the call according to username&pass and dialed number - if authorized, the radius server returns credit time towards the dialed number 2. authorize the call according to username&pass - if authorized, the radius server returns the current account balance <extension name="unitest_rad-ANI-auth"> <condition field="destination_number" expression="^601$"> <action application="log" data="INFO PRIJE RAD_AUTH "/> <action inline="true" application="set" data="CALLID=h323-conf-id=${uuid}"/> <action inline="true" application="set" data="SERVICENUM=h323-prompt-id=${destination_number}"/> <action inline="true" application="set" data="TRANSACTIONID=h323-ivr-out=transactionID:1234"/> <!-- <action inline="true" application="set" data="CALLINGNUMBER=${caller_id_number}"/> --> <action inline="true" application="set" data="CALLINGNUMBER=38516060333"/> <action inline="true" application="set" data="USERNAME=38516060333"/> <!-- <action inline="true" application="set" data="USERNAME=209354"/> --> <action inline="true" application="set" data="PASSWD=003282"/> <!-- <action inline="true" application="set" data="DIALED_NUMBER=16094191500"/> --> <action application="sleep" data="2000"/> <action application="auth_function" data="in ${DIALED_NUMBER}, in ${USERNAME}, in ${PASSWD}, out AUTH_RESULT"/> <action application="log" data="INFO AUTH_RESULT=${AUTH_RESULT}"/> <action application="log" data="INFO billing_model=${billing_model}"/> <action application="log" data="INFO credit_amount=${credit_amount}"/> <action application="log" data="INFO currency=${currency}"/> <action application="log" data="INFO preffered_lang=${preffered_lang}"/> <action application="log" data="INFO credit_time=${credit_time}"/> <action application="log" data="INFO h323_ivr_duration=${h323_ivr_duration}"/> <action application="log" data="INFO return_code=${return_code}"/> <!-- <action application="execute_extension" data="AUTH XML default"/> --> </condition> </extension> <extension name="unitest_rad-ANI-balance"> <condition field="destination_number" expression="^602$"> <action application="log" data="INFO PRIJE RAD_AUTH "/> <action inline="true" application="set" data="CALLID=h323-conf-id=${uuid}"/> <action inline="true" application="set" data="SERVICENUM=h323-prompt-id=${destination_number}"/> <action inline="true" application="set" data="TRANSACTIONID=h323-ivr-out=transactionID:1234"/> <!-- <action inline="true" application="set" data="CALLINGNUMBER=${caller_id_number}"/> --> <action inline="true" application="set" data="CALLINGNUMBER=38516060333"/> <action inline="true" application="set" data="USERNAME=38516060333"/> <!-- <action inline="true" application="set" data="USERNAME=209354"/> --> <action inline="true" application="set" data="PASSWD=003282"/> <action inline="true" application="set" data="DIALED_NUMBER=16094191500"/> <action application="sleep" data="2000"/> <action application="auth_function" data="in ${DIALED_NUMBER}, in ${USERNAME}, in ${PASSWD}, out AUTH_RESULT"/> <action application="log" data="INFO AUTH_RESULT=${AUTH_RESULT}"/> <action application="log" data="INFO billing_model=${billing_model}"/> <action application="log" data="INFO credit_amount=${credit_amount}"/> <action application="log" data="INFO currency=${currency}"/> <action application="log" data="INFO preffered_lang=${preffered_lang}"/> <action application="log" data="INFO credit_time=${credit_time}"/> <action application="log" data="INFO h323_ivr_duration=${h323_ivr_duration}"/> <action application="log" data="INFO return_code=${return_code}"/> <!-- <action application="execute_extension" data="AUTH XML default"/> --> </condition> </extension> will update the wiki by the end of the week. you have enough information for now. Tihomir. On Tue, Mar 30, 2010 at 1:52 PM, Abid Saleem <abid_freeswitch@live.com> wrote: Hi Neal and other Contributors to FS, I recieved an answer on the list that mod_rad_auth is ready. I upgraded FS to download and install it by "make current" and it is successfully built and installed. Could you please outline the detailed steps to do all this configuration. If it is still not ready, is there any other method that somebody has already implemented like perl scripts etc. Any help in this regard is badly required. THanks for your cooperation. Regards----------Abid SaleemSr. Product Manager Hotmail: Powerful Free email with security by Microsoft. Get it now. _________________________________________________________________ Hotmail: Powerful Free email with security by Microsoft. https://signup.live.com/signup.aspx?id=60969