Michael, Thanks very much for remembering about my request. The card was a recent eBay purchase so I was keen to confirm it worked sooner rather than later. Consequently, I built and installed Asterisk, keeping the Zaptel install unchanged. I managed to get that working on the inbound FXO with a small "fix", but have yet to try the workaround in FS. I'm hoping that the fix will translate. Basically, for testing I am using a Netgear TA612V as the FXS ports that I'm connecting to. Asterisk was also initially failing, but by debugging through the SIP I noticed that the Caller Id was coming in with 2 lots of double quotes, i.e. ""tav612v line 1"". It would appear that both the Cisco 7940 and another phone, a Welltech LP201, were rejecting the SIP request due to the double double quotes, with, from memory, a 400 error. I probably didn't have enough debugging configured in FS to see this issue. I tried overriding the callerid in Asterisk, and the SIP request was successful and the call connected. As I said, I haven't had the chance to reconfigure back to FS and apply the same fix. Happy to update the list when I do and confirm, or seek further guidance. Thanks again for getting back to me, Ian.
Ian,
My apologies for not following up sooner. Where you able to get past this issue? I just got my hands on a NxtVox TDM400 compatible card so I will hopefully be playing with it soon. I'm sure that what you are trying to do is not at all unusual and should be easily accomplished with the correct setup. I will work to get that setup properly documented.
-- Be Yourself @ mail.com! Choose From 200+ Email Addresses Get a Free Account at www.mail.com