Can you do two things: Get a debug log of openzap loading, put it on pastebin. (you can unload mod_openzap and then press F8 and type load mod_openzap, capturing the output. Also do "oz list" and "oz dump 1" and pastebin the output. Pastebin your openzap.conf.xml, openzap.conf, and smg_prid.conf files. -MC On Wed, Jan 20, 2010 at 9:04 PM, Thangappan.M <thangappan143@gmail.com>wrote:
OpenZap is loading the ss7 signalling type. As per your concern openzap does not know the details of the signalling then how it is loading the ss7_boost libraries?
FreeSWITCH log: ----------------------------- 2010-01-21 10:10:46.707844 [INFO] zap_io.c:2374 Configured 30 channel(s) 2010-01-21 10:10:46.708600 [INFO] zap_io.c:2468 Loading SIG from /usr/local/freeswitch/mod/ozmod_ss7_boost.so 2010-01-21 10:10:46.709031 [INFO] zap_io.c:2584 auto-loaded 'ss7_boost' 2010-01-21 10:10:46.709466 [DEBUG] ss7_boost_client.c:124 Creating L= 127.0.0.65:53000 R=127.0.0.66:53000 2010-01-21 10:10:46.709834 [DEBUG] ss7_boost_client.c:124 Creating L= 127.0.0.65:53001 R=127.0.0.66:53001 2010-01-21 10:10:46.710424 [WARNING] ss7_boost_client.c:244 TX EVENT (P): SYSTEM_RESTART:(87) [w1g1] Rc=0 CSid=0 Seq=0
The signalling type might be anything but when I used the oz list command it showed the span details. But I am unable to make a inbound and outbound call.
Outbound call result: ============
originate openzap/smg_prid/a/9940464753 openzap/smg_prid/a/9843171457 -ERR NORMAL_CIRCUIT_CONGESTION
2010-01-21 10:26:14.304816 [CRIT] ozmod_ss7_boost.c:244 SPAN is not online. freeswitch@internal> 2010-01-21 10:26:14.304816 [ERR] mod_openzap.c:1043 No channels available 2010-01-21 10:26:14.304816 [ERR] switch_ivr_originate.c:1510 Cannot create outgoing channel of type [openzap] cause: [NORMAL_CIRCUIT_CONGESTION] 2010-01-21 10:26:14.304816 [DEBUG] switch_ivr_originate.c:2138 Originate Resulted in Error Cause: 34 [NORMAL_CIRCUIT_CONGESTION]
Inbound call result: -----------------------------
I made incoming call for the dial plan which is specified in the earlier post at that time it said the number is busy. We did the packet capture using the following command.
wanpipemon -i w1g1 -pcap -pcap file isdn.pcap -port ISDN -full -systime -c trd
Here I attached the pcap file for that.
Where I did mistake or Did I miss any thing to do? Please help me.......
On Wed, Jan 20, 2010 at 7:40 PM, Thangappan.M <thangappan143@gmail.com>wrote:
I noticed the 'oz list' output in that span type is 'ss7 (boost)'. How can I change this to isdn?
On Wed, Jan 20, 2010 at 12:43 PM, Thangappan.M <thangappan143@gmail.com>wrote:
I found the error in it. The file name is used as openzap.conf.xml ( smg_prid is specified here) and another file name as openzap.conf.wiki.xml ( PRI_1 span is specified here ). FreeSWITCH referred the PRI_1 span from openzap.conf.wiki.xml file.
Now the another problem is raised here. When I was using oz list command , the details of the smg_prid shown. When I was using 'oz dump smg_prid' command it shows all the channels' details. But all the channels' states are DOWN. why? How can I make it the states to UP?
When I was making the call , the number is busy message was get. The call was not at all landed to the freeswitch.
Dial plan Example: ------------------------------- <extension name="PRI_Testing"> <condition field="destination_number" expression="^39114600$"> <action application="playback" data="ivr-welcome_to_freeswitch"/> </condition> </extension>
Please help me...........
*Output Reference:* http://pastebin.org/79074
On Wed, Jan 20, 2010 at 11:25 AM, Thangappan.M <thangappan143@gmail.com>wrote:
Dear all,
I have successfully configured wanpipe with freeswitch. When I was the running wancfg_fs script the following files openzap.conf , autoload_confg/openzap.conf.xml , /etc/wanpipe/wanpipe1.xml, smg_pri.conf are created.
I started the wanrouter command then executed the freeswitch. When I was executing freeswitch mod_openzap.c said the error as "Error for finding the span id. name:PRI_1". But in the openzap.conf and openzap.conf.xml files the span name is smg_prid.
Why the freeswitch is referring the span name as PRI_1 ? Whether this has to configured in anywhere?
In the freeswitch CLI using oz command I tried to dump the PRI_1 span id but it said te error as "PRI_1 is not found". When I was trying the command 'oz dump smg_prid' all the channel states and details shown.
It seems that smg_prid span configured in openzap perfectly (Its my assumption). Then Why freeswitch is referring the span name as PRI_1.
DID I MAKE ANY MISTAKE OR DID I MISS ANYTHING TO DO?
Could anyone please help me?
REFERENCE:
openzap.conf [span wanpipe smg_prid] name => smg_prid trunk_type =>e1 b-channel => 1:1-15 b-channel => 1:17-31
openzap.conf.xml <configuration name="openzap.conf" description="OpenZAP Configuration"> <settings> <param name="debug" value="0"/> <!--<param name="hold-music" value="$${moh_uri}"/>--> <!--<param name="enable-analog-option" value="call-swap"/>--> <!--<param name="enable-analog-option" value="3-way"/>--> </settings> <boost_spans> <span id="smg_prid"> <!--<param name="hold-music" value="$${moh_uri}"/>--> <param name="dialplan" value="XML"/> <param name="context" value="default"/> <!-- regex to stop dialing when it matches --> <!--<param name="dial-regex" value="5555"/>--> <!-- regex to stop dialing when it does not match --> <!--<param name="fail-dial-regex" value="^5"/>--> </span> </boost_spans> <analog_spans> </analog_spans> </configuration>
-- Regards, Thangappan.M
-- Regards, Thangappan.M
-- Regards, Thangappan.M
-- Regards, Thangappan.M
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org