The following link have the openzap.conf,openzap.conf.xml ,smg_pri.conf, output of oz list and oz dump. http://www.pastebin.org/81929 On Mon, Jan 25, 2010 at 9:55 AM, Thangappan.M <thangappan143@gmail.com>wrote:
Here I mentioned the link which has the details of /etc/wanpipe/smg_pri.conf http://www.pastebin.org/81895
On Sat, Jan 23, 2010 at 10:02 AM, Thangappan.M <thangappan143@gmail.com>wrote:
Updated the latest version of freeswitch ( 1.0.5-20100121-0400) and run the wanrouter then freeswitch. While executing the freeswtich it said the following error.
[ERR] zap_io.c:2562 Error loading/usr/local/freeswitch/mod/ozmod_sangoma_boost.so
[/usr/local/freeswitch/mod/ozmod_sangoma_boost.so: cannot open shared object file: No such file or directory] [ERR] zap_io.c:2722 can't find 'sangoma_boost
Searched about this in freeswitch mailing list and found one post was there regarding the same problem. Finally found the problem. I missed to install the SCTP packages. Installed it and compiled the freeswitch again now the inbound call was landed on freeswitch.
But I am unable to make a outbound call. When I was trying the following was get.
freeswitch@internal> originate openzap/smg_prid/a/9940464753@g1openzap/smg_prid/a/9940464753@g1 -ERR NORMAL_CIRCUIT_CONGESTION
2010-01-23 10:00:45.688854 [WARNING] ozmod_sangoma_boost.c:348 TX EVENT: CALL_START:(80) [w1g1] CSid=2 Seq=2 Cn=[FreeSWITCH] Cd=[9940464753] Ci=[0000000000] Rdnis=[] freeswitch@internal> 2010-01-23 10:00:46.709355 [WARNING] ozmod_sangoma_boost.c:1373 RX EVENT (N): CALL_START_NACK:(82) [w256g256] Rc=0 CSid=2 Seq=2 2010-01-23 10:00:46.709355 [WARNING] sangoma_boost_client.c:220 TX EVENT (N): CALL_START_NACK_ACK:(83) [w1g1] Rc=0 CSid=2 Seq=3 2010-01-23 10:00:46.709355 [ERR] mod_openzap.c:1162 No channels available 2010-01-23 10:00:46.709355 [ERR] switch_ivr_originate.c:2411 Cannot create outgoing channel of type [openzap] cause: [NORMAL_CIRCUIT_CONGESTION] 2010-01-23 10:00:46.709355 [DEBUG] switch_ivr_originate.c:3211 Originate Resulted in Error Cause: 34 [NORMAL_CIRCUIT_CONGESTION]
Please help me...........
On Fri, Jan 22, 2010 at 10:15 AM, Thangappan.M <thangappan143@gmail.com>wrote:
The following link have the openzap.conf,openzap.conf.xml ,smg_prid.conf , debug log of mod_openzap , oz list and oz dump 1 output.
On Thu, Jan 21, 2010 at 10:34 AM, Thangappan.M <thangappan143@gmail.com>wrote:
OpenZap is loading the ss7 signalling type. As per your concern openzap does not know the details of the signalling then how it is loading the ss7_boost libraries?
FreeSWITCH log: ----------------------------- 2010-01-21 10:10:46.707844 [INFO] zap_io.c:2374 Configured 30 channel(s) 2010-01-21 10:10:46.708600 [INFO] zap_io.c:2468 Loading SIG from /usr/local/freeswitch/mod/ozmod_ss7_boost.so 2010-01-21 10:10:46.709031 [INFO] zap_io.c:2584 auto-loaded 'ss7_boost' 2010-01-21 10:10:46.709466 [DEBUG] ss7_boost_client.c:124 Creating L= 127.0.0.65:53000 R=127.0.0.66:53000 2010-01-21 10:10:46.709834 [DEBUG] ss7_boost_client.c:124 Creating L= 127.0.0.65:53001 R=127.0.0.66:53001 2010-01-21 10:10:46.710424 [WARNING] ss7_boost_client.c:244 TX EVENT (P): SYSTEM_RESTART:(87) [w1g1] Rc=0 CSid=0 Seq=0
The signalling type might be anything but when I used the oz list command it showed the span details. But I am unable to make a inbound and outbound call.
Outbound call result: ============
originate openzap/smg_prid/a/9940464753 openzap/smg_prid/a/9843171457 -ERR NORMAL_CIRCUIT_CONGESTION
2010-01-21 10:26:14.304816 [CRIT] ozmod_ss7_boost.c:244 SPAN is not online. freeswitch@internal> 2010-01-21 10:26:14.304816 [ERR] mod_openzap.c:1043 No channels available 2010-01-21 10:26:14.304816 [ERR] switch_ivr_originate.c:1510 Cannot create outgoing channel of type [openzap] cause: [NORMAL_CIRCUIT_CONGESTION] 2010-01-21 10:26:14.304816 [DEBUG] switch_ivr_originate.c:2138 Originate Resulted in Error Cause: 34 [NORMAL_CIRCUIT_CONGESTION]
Inbound call result: -----------------------------
I made incoming call for the dial plan which is specified in the earlier post at that time it said the number is busy. We did the packet capture using the following command.
wanpipemon -i w1g1 -pcap -pcap file isdn.pcap -port ISDN -full -systime -c trd
Here I attached the pcap file for that.
Where I did mistake or Did I miss any thing to do? Please help me.......
On Wed, Jan 20, 2010 at 7:40 PM, Thangappan.M <thangappan143@gmail.com>wrote:
I noticed the 'oz list' output in that span type is 'ss7 (boost)'. How can I change this to isdn?
On Wed, Jan 20, 2010 at 12:43 PM, Thangappan.M < thangappan143@gmail.com> wrote:
I found the error in it. The file name is used as openzap.conf.xml ( smg_prid is specified here) and another file name as openzap.conf.wiki.xml ( PRI_1 span is specified here ). FreeSWITCH referred the PRI_1 span from openzap.conf.wiki.xml file.
Now the another problem is raised here. When I was using oz list command , the details of the smg_prid shown. When I was using 'oz dump smg_prid' command it shows all the channels' details. But all the channels' states are DOWN. why? How can I make it the states to UP?
When I was making the call , the number is busy message was get. The call was not at all landed to the freeswitch.
Dial plan Example: ------------------------------- <extension name="PRI_Testing"> <condition field="destination_number" expression="^39114600$"> <action application="playback" data="ivr-welcome_to_freeswitch"/> </condition> </extension>
Please help me...........
*Output Reference:* http://pastebin.org/79074
On Wed, Jan 20, 2010 at 11:25 AM, Thangappan.M < thangappan143@gmail.com> wrote:
> Dear all, > > I have successfully configured wanpipe with freeswitch. When > I was the running wancfg_fs script the following files openzap.conf , > autoload_confg/openzap.conf.xml , /etc/wanpipe/wanpipe1.xml, smg_pri.conf > are created. > > I started the wanrouter command then executed the > freeswitch. > When I was executing freeswitch mod_openzap.c said the error > as "Error for finding the span id. name:PRI_1". > But in the openzap.conf and openzap.conf.xml files the span > name is smg_prid. > > Why the freeswitch is referring the span name as PRI_1 ? > Whether this has to configured in anywhere? > > In the freeswitch CLI using oz command I tried to dump the > PRI_1 span id but it said te error as "PRI_1 is not found". When I was > trying the command 'oz dump smg_prid' all the channel states and details > shown. > > It seems that smg_prid span configured in openzap perfectly > (Its my assumption). Then Why freeswitch is referring the span name as > PRI_1. > > DID I MAKE ANY MISTAKE OR DID I MISS ANYTHING TO DO? > > Could anyone please help me? > > REFERENCE: > > openzap.conf > [span wanpipe smg_prid] > name => smg_prid > trunk_type =>e1 > b-channel => 1:1-15 > b-channel => 1:17-31 > > > openzap.conf.xml > <configuration name="openzap.conf" description="OpenZAP > Configuration"> > <settings> > <param name="debug" value="0"/> > <!--<param name="hold-music" value="$${moh_uri}"/>--> > <!--<param name="enable-analog-option" value="call-swap"/>--> > <!--<param name="enable-analog-option" value="3-way"/>--> > </settings> > <boost_spans> > <span id="smg_prid"> > <!--<param name="hold-music" value="$${moh_uri}"/>--> > <param name="dialplan" value="XML"/> > <param name="context" value="default"/> > <!-- regex to stop dialing when it matches --> > <!--<param name="dial-regex" value="5555"/>--> > <!-- regex to stop dialing when it does not match --> > <!--<param name="fail-dial-regex" value="^5"/>--> > </span> > </boost_spans> > <analog_spans> > </analog_spans> > </configuration> > > > > > > > -- > Regards, > Thangappan.M >
-- Regards, Thangappan.M
-- Regards, Thangappan.M
-- Regards, Thangappan.M
-- Regards, Thangappan.M
-- Regards, Thangappan.M
-- Regards, Thangappan.M
-- Regards, Thangappan.M